Project Sales Corp's New Product Portfolio to Address Sponge Iron Industry's Lubrication Requirements
Project Sales Corp, authorized channel partners for Dow Corning introduces special lubricants formulated for the needs of the sponge iron industry. The product range is designed to handle the lubrication of critical equipments including large open gear drives, slip seals, motor bearings and continuous casters.
Visakhapatnam, India, August 24, 2006 --(PR.com)-- Lubricating some of the critical equipments in a sponge iron industry, under some very demanding conditions of heat, dust and heavy loads is a complex task. Off the shelf products often do not work. It is imperative that special lubricants specially formulated to meet the requirements are used in the critical equipments to ensure there are no downtime or machinery failures.
Molykote, a brand of Dow Corning Corporation, USA has developed specialized lubricants for the requirements of the sponge iron industry. Project Sales Corp, authorized channel partners for the company markets these products in Eastern India.
Some of the key application areas as highlighted by Project Sales Corp, where the requirements of a special lubricant is essential includes:
Slip Seal Mechanisms
Slip Seal Mechanisms in Sponge Iron Plants are lubricated with high performance Molykote Greases designed to withstand high temperatures, good pumpability and provide desired sealing effect.
Molykote G-0103 designed for slip seal application has a high drop point, with high base oil viscosity to provide lubricity and sealing effect, and is easily pumped through centralized systems.
Motor Bearings
Motor Bearings are lubricated with high temperature and shear resistant polyurea greases from Molykote.
Molykote G-0100 is a mineral grease with high temperature resistance designed for motors operating in continuous high temperatures. The grease provides long-term lubrication and avoids costly downtime due to bearing failures.
Support Roller Bearings
Support Roller Bearings are best lubricated with very high viscosity greases designed to provide a separating film. A viscosity of 1000 cst is recommended for this application.
Girth Gears
From the priming, running-in and service lubricants, to provide complete technical services during installation and commissioning, Molykote Lubrication Program for girth gears are designed to extend your equipment life.
MolykoteQ3-4613 Priming Paste is a paste with highly refined mineral oils with a high concentration of solid lubricants. Thanks to its special formulation, it creates on the metallic surfaces a solid lubricant film, avoiding seizing and enabling easy settlement during running-in.
Molykote KGP-2P/E Running-in grease is specially developed for the running-in of new gears or for repair of their damaged surfaces (severe wear and/or other problems like pitting, scoring and spalling). Unlike many other running-in products, Molykote KGP-2P/E does not contain abrasive particles but contain solid lubricants and chemical action additives which provide excellent lubricating characteristics for running-in or repair of gears. The grease is sprayable and can be pumped in centralized lubrication systems.
Molykote KGP-2/P is the sprayable service grease with a base oil viscosity of 1000 cst containing an optimum blend of solid lubricants with a purity of 99.5 to 99.9 percentage. Formulated with highly refined mineral oils and complex aluminium thickeners, the product contains solid lubricants and chemical reaction additives that provide a separating film under the highest stresses. The product is free of lead, heavy metals, asphalt (bitumen) and other products detrimental to the environment.
Continuous Casters
Molykote High Temperature G-0106 Sitela 1 Grease is designed for roller bearings of continuous casters which operate under high temperatures and presence of water and moisture. Approved by leading OEs including Concast India, and more recently SMS Demag, the product is a high performance polyurea grease with a drop point > 250 deg C
Impactors, Crushers and Screens
Coal Impactors, Iron Jaw Crushers, Vibratory Screens and Conveyor End Rollers are some of the other applications areas for Molykote in a sponge-iron industry.
Molykote Long-term 2+ is an extreme pressure grease designed for the highest bearing loads and long-term lubrication, with a unique blend of high viscosity base oils, extreme pressure additives, Mos2 and other solid lubricants. The product helps extend relubrication intervals, increase reliability of operations, prevents costly bearing failures and minimize downtime.
No matter, you are looking for a good quality lubricant, or technical expertise to help solve some of your lubrication problems in the sponge iron industry, talk to the team at Dow Corning. With the most extensive range of special lubricants for the sponge iron industry, from greases to mineral oils, from semi-synthetics to synthetic fluids, Molykote has it all.
To consolidate all your requirements with Molykote, get in touch with Project Sales Corp, distributors in your region, at 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP, India. Call 0891 2564393, 5566482, Fax 0891 2590482 or mailto: satish@projectsalescorp.com.
They have the right expertise to extend your equipment life.
###
Molykote, a brand of Dow Corning Corporation, USA has developed specialized lubricants for the requirements of the sponge iron industry. Project Sales Corp, authorized channel partners for the company markets these products in Eastern India.
Some of the key application areas as highlighted by Project Sales Corp, where the requirements of a special lubricant is essential includes:
Slip Seal Mechanisms
Slip Seal Mechanisms in Sponge Iron Plants are lubricated with high performance Molykote Greases designed to withstand high temperatures, good pumpability and provide desired sealing effect.
Molykote G-0103 designed for slip seal application has a high drop point, with high base oil viscosity to provide lubricity and sealing effect, and is easily pumped through centralized systems.
Motor Bearings
Motor Bearings are lubricated with high temperature and shear resistant polyurea greases from Molykote.
Molykote G-0100 is a mineral grease with high temperature resistance designed for motors operating in continuous high temperatures. The grease provides long-term lubrication and avoids costly downtime due to bearing failures.
Support Roller Bearings
Support Roller Bearings are best lubricated with very high viscosity greases designed to provide a separating film. A viscosity of 1000 cst is recommended for this application.
Girth Gears
From the priming, running-in and service lubricants, to provide complete technical services during installation and commissioning, Molykote Lubrication Program for girth gears are designed to extend your equipment life.
MolykoteQ3-4613 Priming Paste is a paste with highly refined mineral oils with a high concentration of solid lubricants. Thanks to its special formulation, it creates on the metallic surfaces a solid lubricant film, avoiding seizing and enabling easy settlement during running-in.
Molykote KGP-2P/E Running-in grease is specially developed for the running-in of new gears or for repair of their damaged surfaces (severe wear and/or other problems like pitting, scoring and spalling). Unlike many other running-in products, Molykote KGP-2P/E does not contain abrasive particles but contain solid lubricants and chemical action additives which provide excellent lubricating characteristics for running-in or repair of gears. The grease is sprayable and can be pumped in centralized lubrication systems.
Molykote KGP-2/P is the sprayable service grease with a base oil viscosity of 1000 cst containing an optimum blend of solid lubricants with a purity of 99.5 to 99.9 percentage. Formulated with highly refined mineral oils and complex aluminium thickeners, the product contains solid lubricants and chemical reaction additives that provide a separating film under the highest stresses. The product is free of lead, heavy metals, asphalt (bitumen) and other products detrimental to the environment.
Continuous Casters
Molykote High Temperature G-0106 Sitela 1 Grease is designed for roller bearings of continuous casters which operate under high temperatures and presence of water and moisture. Approved by leading OEs including Concast India, and more recently SMS Demag, the product is a high performance polyurea grease with a drop point > 250 deg C
Impactors, Crushers and Screens
Coal Impactors, Iron Jaw Crushers, Vibratory Screens and Conveyor End Rollers are some of the other applications areas for Molykote in a sponge-iron industry.
Molykote Long-term 2+ is an extreme pressure grease designed for the highest bearing loads and long-term lubrication, with a unique blend of high viscosity base oils, extreme pressure additives, Mos2 and other solid lubricants. The product helps extend relubrication intervals, increase reliability of operations, prevents costly bearing failures and minimize downtime.
No matter, you are looking for a good quality lubricant, or technical expertise to help solve some of your lubrication problems in the sponge iron industry, talk to the team at Dow Corning. With the most extensive range of special lubricants for the sponge iron industry, from greases to mineral oils, from semi-synthetics to synthetic fluids, Molykote has it all.
To consolidate all your requirements with Molykote, get in touch with Project Sales Corp, distributors in your region, at 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP, India. Call 0891 2564393, 5566482, Fax 0891 2590482 or mailto: satish@projectsalescorp.com.
They have the right expertise to extend your equipment life.
###
Contact
Project Sales Corp
Satish Agrawal
+918912564393
www.projectsalescorp.com
Direct +919885149412
Satish Agrawal
+918912564393
www.projectsalescorp.com
Direct +919885149412
Contact
Categories