4D Systems Launches Arduino Display Shields
4D Systems launches Arduino Display Shields to easily interface its popular GOLDELOX-embedded range of OLED and LCD display modules with virtually all popular Arduino Boards.
Sydney, Australia, September 02, 2010 --(PR.com)-- 4D Systems announced today the launch of its new Arduino Display Shield Modules – 4Display-Shield. The 4Display-Shields are designed to provide an easy and quick way to interface the popular Goldelox-embedded range of small OLED and LCD display modules with the Arduino-Duemilanove, Arduino-Mega and many other Arduino compatible boards.
The 4Display-Shields come complete with the integrated 4D Systems OLED or LCD display module, a 5-way multi-switch joystick, and male headers that help connect the 4Display-Shield to the Arduino Boards. The 5-way joystick is connected to the Arduino D2, D3, D4, D5 and D6 pins, and communication between the 4Display-Shield and the Arduino takes place via the Serial UART. The included display modules ranging from tiny 0.96” form factor up to 1.7” full colour OLED screen, include a tiny yet powerful GOLDOX graphics controller chip and a micro-SD connector that supports standard and HC memory cards, which can be used for storing images, icons, video clips and data.
The display modules can be configured to run under two different operating modes when interfaced with Arduino using the 4Display-Shields – Serial Platform Module (SGC) and 4DGL Platform Module (GFX). Switching between the two modes is done via a simple software update.
The SGC mode turns the embedded GOLDEOX chip into a slave device and the Arduino becomes the host controller allowing users to develop graphics applications using the Arduino development environment and software tools. With a few bytes of serial data sent from the Arduino users can quickly and easily draw lines, circles, text and even display images and play video clips on the screen. Whilst the SGC platform resources are abundant, 4D Systems is also developing dedicated serial command libraries for the Arduino, which will be available soon.
The GFX mode turns the embedded GOLDELOX chip into a stand-alone device where all application code is written in 4DGL (4D Graphics Language) that has syntax similar to popular languages such as BASIC, C and Pascal. Using 4DGL allows users to take complete control of all resources available on each display module such as the Serial Port, the graphics display, the micro-SD card and access to the I/O pins. This gives the possibility to offload a lot of overhead from the host processor by creating the ‘work horse’ objects within the display module itself. For example, for a game of Tetris, entire functions that can be created in 4DGL and triggered with simple serial commands from the host instead of sending all graphics objects as serial graphics primitives. This gives the users the possibility for a neat division between the graphics functions and the game itself, allowing swift changes in the game’s appearance without altering the main Arduino game code. A comprehensive IDE that includes an editor, compiler, linker and downloader is provided free of charge for developing complete 4DGL applications.
“In the past few years we have come across some tutorials online on how to interface our display modules with Arduino. Also, recently we started receiving and increasing number requests asking for help in interfacing our display modules with Arduino boards. Having moved our production in-house we now have the flexibility to easily design and produce new modules and boards, so we decided to make our own display shield for Arduino to meet our customer requests and make interfacing with our display modules with the Arduino boards as easy and simple as possible. We will be expanding the 4Display-Shield range to our PICASO-embedded display modules in the near future.” – Sinan Aknar, Global Marketing & Sales, 4D Systems.
The 4Display-Shields are available in four configurations:
4Display-Shield-96 – 0.96” PMOLED
4Display-Shield-128 – 1.5” PMOLED
4Display-Shield-160 – 1.7” PMOLED
4Display-Shield-144 – 1.44 LCD TFT
Prices range from $49/€39 - $79/€63. All modules are available for purchase from your local distributor or reseller, or directly from 4D Systems. All related software tools are available as a free download from 4D Systems’ website at www.4dsystems.com.au.
About 4D Systems – Turning Technology into Art
4D Systems is a global leader in development and manufacture of intelligent graphic display modules, with headquarters in Sydney, Australia and regional office in Vienna, Austria. 4D Systems designs and manufactures compact and cost effective intelligent display modules using the latest state of the art OLED and LCD technology with an embedded custom graphics processor that delivers stand-alone functionality to various applications and provides rapid time-to-market on new product development.
For further information about 4D Systems and Products please visit www.4dsystems.com.au.
Media Contacts:
Australia
Sinan Aknar, Global Marketing & Sales
Phone: +61 (0) 2 9677 9191,
Email: sinan@4dsystems.com.au
Europe
Markku Riihonen, EMEA Marketing & Sales
Phone: +43 (0)2231 68347,
Email: europe@4dsystems.com.au
###
The 4Display-Shields come complete with the integrated 4D Systems OLED or LCD display module, a 5-way multi-switch joystick, and male headers that help connect the 4Display-Shield to the Arduino Boards. The 5-way joystick is connected to the Arduino D2, D3, D4, D5 and D6 pins, and communication between the 4Display-Shield and the Arduino takes place via the Serial UART. The included display modules ranging from tiny 0.96” form factor up to 1.7” full colour OLED screen, include a tiny yet powerful GOLDOX graphics controller chip and a micro-SD connector that supports standard and HC memory cards, which can be used for storing images, icons, video clips and data.
The display modules can be configured to run under two different operating modes when interfaced with Arduino using the 4Display-Shields – Serial Platform Module (SGC) and 4DGL Platform Module (GFX). Switching between the two modes is done via a simple software update.
The SGC mode turns the embedded GOLDEOX chip into a slave device and the Arduino becomes the host controller allowing users to develop graphics applications using the Arduino development environment and software tools. With a few bytes of serial data sent from the Arduino users can quickly and easily draw lines, circles, text and even display images and play video clips on the screen. Whilst the SGC platform resources are abundant, 4D Systems is also developing dedicated serial command libraries for the Arduino, which will be available soon.
The GFX mode turns the embedded GOLDELOX chip into a stand-alone device where all application code is written in 4DGL (4D Graphics Language) that has syntax similar to popular languages such as BASIC, C and Pascal. Using 4DGL allows users to take complete control of all resources available on each display module such as the Serial Port, the graphics display, the micro-SD card and access to the I/O pins. This gives the possibility to offload a lot of overhead from the host processor by creating the ‘work horse’ objects within the display module itself. For example, for a game of Tetris, entire functions that can be created in 4DGL and triggered with simple serial commands from the host instead of sending all graphics objects as serial graphics primitives. This gives the users the possibility for a neat division between the graphics functions and the game itself, allowing swift changes in the game’s appearance without altering the main Arduino game code. A comprehensive IDE that includes an editor, compiler, linker and downloader is provided free of charge for developing complete 4DGL applications.
“In the past few years we have come across some tutorials online on how to interface our display modules with Arduino. Also, recently we started receiving and increasing number requests asking for help in interfacing our display modules with Arduino boards. Having moved our production in-house we now have the flexibility to easily design and produce new modules and boards, so we decided to make our own display shield for Arduino to meet our customer requests and make interfacing with our display modules with the Arduino boards as easy and simple as possible. We will be expanding the 4Display-Shield range to our PICASO-embedded display modules in the near future.” – Sinan Aknar, Global Marketing & Sales, 4D Systems.
The 4Display-Shields are available in four configurations:
4Display-Shield-96 – 0.96” PMOLED
4Display-Shield-128 – 1.5” PMOLED
4Display-Shield-160 – 1.7” PMOLED
4Display-Shield-144 – 1.44 LCD TFT
Prices range from $49/€39 - $79/€63. All modules are available for purchase from your local distributor or reseller, or directly from 4D Systems. All related software tools are available as a free download from 4D Systems’ website at www.4dsystems.com.au.
About 4D Systems – Turning Technology into Art
4D Systems is a global leader in development and manufacture of intelligent graphic display modules, with headquarters in Sydney, Australia and regional office in Vienna, Austria. 4D Systems designs and manufactures compact and cost effective intelligent display modules using the latest state of the art OLED and LCD technology with an embedded custom graphics processor that delivers stand-alone functionality to various applications and provides rapid time-to-market on new product development.
For further information about 4D Systems and Products please visit www.4dsystems.com.au.
Media Contacts:
Australia
Sinan Aknar, Global Marketing & Sales
Phone: +61 (0) 2 9677 9191,
Email: sinan@4dsystems.com.au
Europe
Markku Riihonen, EMEA Marketing & Sales
Phone: +43 (0)2231 68347,
Email: europe@4dsystems.com.au
###
Contact
4D Systems
Markku Riihonen
+43 (0)2231 68347
Markku Riihonen
+43 (0)2231 68347
Contact
Categories