MA-UNI: Signal Conditioning from bmcm for Mobile Use
Maisach, Germany, December 12, 2010 --(PR.com)-- BMC Messsysteme GmbH (bmcm), longtime specialist for measurement technology "made in Germany" introduces the MA-UNI, a universal measuring amplifier in 5B standard, allowing the service technician to be well prepared for all eventualities.
Technical interferences and damages in industrial environment can have a wide range of reasons. Breakdowns immediately produce high costs. To enable the service technician to quickly react on site, often measurements of the most different kind are necessary.
Measurement technology meeting the manifold requirements in mobile use must be universal, compact and resistant to interferences.
The 5B module MA-UNI from BMC Messsysteme GmbH (bmcm) is a real all-rounder in the field of signal conditioning.
Whatever is to be measured - voltage, current, resistance, or temperature: The measuring amplifier MA-UNI adjusts signals of different type and size to the 5V input of a PC data acquisition system.
All common sensors as well as LVDTs and measuring bridges can be connected directly.
With 10kHz bandwidth, it is ideal for dynamic signals.
Common-mode interferences often produced by machinery or other loads in industrial environment are effectively suppressed by the balanced input of the differential amplifier.
In addition, the galvanic isolation of the 5B module protects the whole system against high potentials and interferences.
Operating mode and measuring range are set with DIP switches and solder bridges. If only one switch is flipped, for example, the MA-UNI is reconfigured from voltage measurement to carrier frequency mode or for using a strain gage measuring bridge.
Bmcm offers a highly compact solution to connect the MA-UNI to a PC data acquisition system: Up to 16 MA-UNI or other 5B modules can be installed in the portable, 19''-compatible (width: 42 HP) table-top units of the AMS42 series from bmcm. If the service technician chooses the version with integrated DAQ system (USB or LAN), his on-site measurement system consists of laptop, AMS42 amplifier measurement system, and sensors - universal, compact and interference-free.
The universal measuring amplifier MA-UNI from bmcm: Signal conditioning for someone not knowing today what he will measure tomorrow.
Further information is provided on the website of BMC Messsysteme GmbH.
###
BMC Messsysteme GmbH
Hauptstrasse 21
82216 Maisach /Munich
Germany
Sales:
Phone: 0049-8141-404180-2
Fax: 0049-8141-404180-9
*** About BMC Messsysteme GmbH (bmcm) ***
BMC Messsysteme GmbH was founded in 1994 as an independent corporation with headquarters in Maisach, app. 30 km west of Munich. bmcm is one of the only German companies that completely develops and produces in Germany. The products of data acquisition and PC technology from BMC Messysteme GmbH stand for quality "made in Germany". A high value is set on keeping an excellent price/performance ratio. Since establishing a direct distribution in July 2006, customers have been able to profit from the advantage of direct contact to the manufacturer.
BMC Messsysteme GmbH serves the following business areas:
* Measuring components and PC measurement technology *
This comprises a wide range of connection systems, measuring amplifiers, data acquisition cards (internal and external), "ready-for-use" data acquisition systems, data loggers and the appropriate software for visualization, recording and analysis.
* PC technology *
This area includes embedded PCs developed as complete solutions as well as single PC components often used in the automotive field.
* D2M (Design to Manufacturing) and OEM products *
BMC Messsysteme GmbH develops and produces electronic components according to customer specifications.
You will receive high-quality products manufactured already since the beginning of 2006 according to the RoHS directive. Of course, the corresponding documentation and CE test is always included.
A German documentation is obligatory for us, as well as an English description to be available to our international customers.
Technical interferences and damages in industrial environment can have a wide range of reasons. Breakdowns immediately produce high costs. To enable the service technician to quickly react on site, often measurements of the most different kind are necessary.
Measurement technology meeting the manifold requirements in mobile use must be universal, compact and resistant to interferences.
The 5B module MA-UNI from BMC Messsysteme GmbH (bmcm) is a real all-rounder in the field of signal conditioning.
Whatever is to be measured - voltage, current, resistance, or temperature: The measuring amplifier MA-UNI adjusts signals of different type and size to the 5V input of a PC data acquisition system.
All common sensors as well as LVDTs and measuring bridges can be connected directly.
With 10kHz bandwidth, it is ideal for dynamic signals.
Common-mode interferences often produced by machinery or other loads in industrial environment are effectively suppressed by the balanced input of the differential amplifier.
In addition, the galvanic isolation of the 5B module protects the whole system against high potentials and interferences.
Operating mode and measuring range are set with DIP switches and solder bridges. If only one switch is flipped, for example, the MA-UNI is reconfigured from voltage measurement to carrier frequency mode or for using a strain gage measuring bridge.
Bmcm offers a highly compact solution to connect the MA-UNI to a PC data acquisition system: Up to 16 MA-UNI or other 5B modules can be installed in the portable, 19''-compatible (width: 42 HP) table-top units of the AMS42 series from bmcm. If the service technician chooses the version with integrated DAQ system (USB or LAN), his on-site measurement system consists of laptop, AMS42 amplifier measurement system, and sensors - universal, compact and interference-free.
The universal measuring amplifier MA-UNI from bmcm: Signal conditioning for someone not knowing today what he will measure tomorrow.
Further information is provided on the website of BMC Messsysteme GmbH.
###
BMC Messsysteme GmbH
Hauptstrasse 21
82216 Maisach /Munich
Germany
Sales:
Phone: 0049-8141-404180-2
Fax: 0049-8141-404180-9
*** About BMC Messsysteme GmbH (bmcm) ***
BMC Messsysteme GmbH was founded in 1994 as an independent corporation with headquarters in Maisach, app. 30 km west of Munich. bmcm is one of the only German companies that completely develops and produces in Germany. The products of data acquisition and PC technology from BMC Messysteme GmbH stand for quality "made in Germany". A high value is set on keeping an excellent price/performance ratio. Since establishing a direct distribution in July 2006, customers have been able to profit from the advantage of direct contact to the manufacturer.
BMC Messsysteme GmbH serves the following business areas:
* Measuring components and PC measurement technology *
This comprises a wide range of connection systems, measuring amplifiers, data acquisition cards (internal and external), "ready-for-use" data acquisition systems, data loggers and the appropriate software for visualization, recording and analysis.
* PC technology *
This area includes embedded PCs developed as complete solutions as well as single PC components often used in the automotive field.
* D2M (Design to Manufacturing) and OEM products *
BMC Messsysteme GmbH develops and produces electronic components according to customer specifications.
You will receive high-quality products manufactured already since the beginning of 2006 according to the RoHS directive. Of course, the corresponding documentation and CE test is always included.
A German documentation is obligatory for us, as well as an English description to be available to our international customers.
Contact
BMC Messsysteme GmbH (bmcm)
Frank Schlenner
0049-8141-404180-2
www.bmcm.de
Hauptstrasse 21
82216 Maisach /Munich
Germany
Frank Schlenner
0049-8141-404180-2
www.bmcm.de
Hauptstrasse 21
82216 Maisach /Munich
Germany
Contact
Categories