Pentek Brings Power of Cobalt Virtex-6 Family to CompactPCI System Designs
*A/D and D/A rates from 10 MHz to 1 GHz *On-board Virtex-6 FPGAs for custom signal processing * 3U and 6U form factors with up to two Cobalt modules installed.
Upper Saddle River, NJ, May 27, 2011 --(PR.com)-- Pentek, Inc., today announced that its highly popular Cobalt® board family is now available for use in CompactPCI (cPCI) systems. The migration to cPCI gives system designers full access to Pentek’s advanced modular technology, which features high-performance signal acquisition and the processing power of Xilinx Virtex-6 FPGAs.
“With the adaptation of our Cobalt modules to CompactPCI, we have rounded out the family to serve all popular embedded system standards,” said Pentek Vice President Rodger Hosking. “Developers who need to insert the latest A/D, D/A and FPGA technology in existing cPCI systems will find this a cost-effective way to upgrade, because it preserves the rest of the system.”
Cobalt family capabilities now available for cPCI systems include:
*1 GHz A/D & 1 GHz D/A (Model xx630)
*2 Channel 500 MHz A/D, DUC & 2 Channel 800 MHz D/A (Model xx650)
*3 Channel 200 MHz A/D, DUC & 2 Channel 800 MHz D/A (Model xx620)
*3 Channel 200 MHz A/D, DDC, DUC & 2 Channel 800 MHz D/A (Model xx621)
*4 Channel 200 MHz 16-bit A/D (Model xx660)
*4 Channel 200 MHz A/D & Quad DDCs with Beamforming IP (Model xx661)
*L-Band RF (925-2175 MHz) Tuner with 2 Channel 200 MHz A/D (Model xx690)
All modules feature dedicated DMA channels and memory buffers for each I/O stream, and multi-channel, multi-board synchronization along with a customizable Virtex-6 FPGA for on-board signal processing.
Boards are available as 3U cPCI carriers (73xxx) containing one Cobalt XMC module; 6U cPCI carriers (72xxx) with one XMC installed; and 6U cPCI carriers (74xxx) containing two identical Cobalt XMC modules. Custom configurations mixing XMC module types on a 6U carrier are also possible, yielding single-slot solutions for a wide range of signal acquisition and processing applications.
A bridge chip handles mapping of the Cobalt module’s serial PCIe interface to the parallel PCI bus. Developers can utilize the Virtex-6 FPGAs for on-board signal processing that can help reduce data transfer rates across the backplane. Options are also available for providing LVDS to the cPCI J2 (3U cPCI) or J3 and J5 (6U cPCI) connectors for application-specific custom I/O.
Full Software Development Support
All software and FPGA development tools for the Cobalt family are immediately available to support cPCI designs. Pentek’s ReadyFlow® Board Support Libraries include drivers for Linux, Windows and VxWorks operating systems, as well as turnkey application software that provides out-of-the-box modules.
Pentek’s GateFlow® FPGA Design Kit allows users to incorporate custom algorithms connected to the pre-configured interface functions installed on the Virtex-6 FPGA. GateFlow enables customers to implement high-performance signal processing functions for wideband communications, radar, signal intelligence and beamforming.
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek develops, manufactures and markets innovative DSP systems to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe boards for data acquisition, software radio and digital signal processing featuring Texas Instruments C6000 DSPs, Freescale G4 PowerPCs and Xilinx FPGAs. Pentek's I/O includes A/Ds, D/As, FPGAs, digital up/downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
###
Pentek, GateFlow, Cobalt and ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=153
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Elexo in France at (33) 0141 22 1023, Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
“With the adaptation of our Cobalt modules to CompactPCI, we have rounded out the family to serve all popular embedded system standards,” said Pentek Vice President Rodger Hosking. “Developers who need to insert the latest A/D, D/A and FPGA technology in existing cPCI systems will find this a cost-effective way to upgrade, because it preserves the rest of the system.”
Cobalt family capabilities now available for cPCI systems include:
*1 GHz A/D & 1 GHz D/A (Model xx630)
*2 Channel 500 MHz A/D, DUC & 2 Channel 800 MHz D/A (Model xx650)
*3 Channel 200 MHz A/D, DUC & 2 Channel 800 MHz D/A (Model xx620)
*3 Channel 200 MHz A/D, DDC, DUC & 2 Channel 800 MHz D/A (Model xx621)
*4 Channel 200 MHz 16-bit A/D (Model xx660)
*4 Channel 200 MHz A/D & Quad DDCs with Beamforming IP (Model xx661)
*L-Band RF (925-2175 MHz) Tuner with 2 Channel 200 MHz A/D (Model xx690)
All modules feature dedicated DMA channels and memory buffers for each I/O stream, and multi-channel, multi-board synchronization along with a customizable Virtex-6 FPGA for on-board signal processing.
Boards are available as 3U cPCI carriers (73xxx) containing one Cobalt XMC module; 6U cPCI carriers (72xxx) with one XMC installed; and 6U cPCI carriers (74xxx) containing two identical Cobalt XMC modules. Custom configurations mixing XMC module types on a 6U carrier are also possible, yielding single-slot solutions for a wide range of signal acquisition and processing applications.
A bridge chip handles mapping of the Cobalt module’s serial PCIe interface to the parallel PCI bus. Developers can utilize the Virtex-6 FPGAs for on-board signal processing that can help reduce data transfer rates across the backplane. Options are also available for providing LVDS to the cPCI J2 (3U cPCI) or J3 and J5 (6U cPCI) connectors for application-specific custom I/O.
Full Software Development Support
All software and FPGA development tools for the Cobalt family are immediately available to support cPCI designs. Pentek’s ReadyFlow® Board Support Libraries include drivers for Linux, Windows and VxWorks operating systems, as well as turnkey application software that provides out-of-the-box modules.
Pentek’s GateFlow® FPGA Design Kit allows users to incorporate custom algorithms connected to the pre-configured interface functions installed on the Virtex-6 FPGA. GateFlow enables customers to implement high-performance signal processing functions for wideband communications, radar, signal intelligence and beamforming.
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek develops, manufactures and markets innovative DSP systems to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe boards for data acquisition, software radio and digital signal processing featuring Texas Instruments C6000 DSPs, Freescale G4 PowerPCs and Xilinx FPGAs. Pentek's I/O includes A/Ds, D/As, FPGAs, digital up/downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
###
Pentek, GateFlow, Cobalt and ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=153
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Elexo in France at (33) 0141 22 1023, Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
Contact
Pentek, Inc.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Contact
Categories