Pentek Launches First Digital I/O High-Speed Recording System Family with the New Talon RTS 2715 10Gig Ethernet Data Recorder
* Recording of up to two 10-Gigabit Ethernet data streams with zero data loss * Support for copper, multi-mode, or single-mode optical interfaces * Up to 20 TB of magnetic or solid-state, hot-swappable NTFS RAID storage * Pre-loaded SystemFlow software includes easy-to-use graphical user interface and application programming interface for turnkey operation and integration
Upper Saddle River, NJ, November 11, 2011 --(PR.com)-- Pentek, Inc., today released the first in a new family of COTS (commercial-off-the-shelf) turnkey high-speed digital recorders, the Talon™ RTS 2715. Available with either magnetic or solid-state disk drive arrays, the RTS 2715 can continuously record up to two 10-Gigabit Ethernet (10GbE) data streams to a RAID array without data loss.
According to Rodger Hosking, vice president of Pentek, “Many of our customers have sensors and computer systems communicating massive amounts of digital data over a network and they need a way to capture that information for archiving or post-mission analysis. Our new Talon line of digital recorders addresses that need. The first in the family, the RTS 2715, handles 10GbE with a variety of data protocols and physical interface types in a commercial-grade configuration. Ruggedized versions and other configurations are on the horizon.”
The RTS 2715 can capture one or two simultaneous 10GbE data streams, guaranteeing zero data loss with an aggregate recording rate up to 2 Gbytes/sec. It accepts either TCP or UDP data packet protocols and stores data to files on a RAID disk array. The RTS 2715 can also play data back from its drives, streaming it over the 10GbE channels using either protocol. An optional GPS module provides time and position stamping during data capture.
Multiple Interface and Recording Options
The RAID drives are hot-swappable, allowing virtually unlimited data capture capacities. Because the files are stored in a NTFS (new technology file system) format, users can read the files on a standard Windows-based computer system, eliminating the need for file format conversion. Two Gigabit Ethernet ports, four USB ports and a built-in optical disk drive provide alternatives for off-loading data.
Drives are available in several different configurations, supporting RAID levels of 0, 1, 5, 10, or 50 with up to 20 Terabytes (TB) of data storage. Single-channel recorders are available in 5 TB, 10 TB, and 20 TB versions using up to 24, 3.5” hard disk drives (HDD). A 2 TB version uses up to eight solid-state drives (SSD). Dual-channel recorders include 10 TB and 20 TB HDD and 3 TB SSD versions. Both 4U and 5U rack mount chassis configurations are offered.
Customers can specify any of three popular physical interface options for the 10GbE connections. The CX4 interface supports Twinax copper cabling for run lengths up to15m. Optical interfaces operating at 850nm using LC connectors are available for either multi-mode fiber cables up to 300m long or single-mode fiber cables for run lengths up to 10km.
Built-in Workstation
The RTS 2715 is built on a server-class Windows 7 Professional workstation with a 1.8 GHz Intel® Core™ i7 processor and 2 GB of SDRAM. This workstation comes pre-loaded with Pentek’s SystemFlow Recording Software, which provides a simple and intuitive GUI (graphical user interface) for system configuration and control that shares the look and feel of other Pentek Talon recording systems. Users can store custom configurations as profiles for single-click setup, and use the Gigabit Ethernet interface for remote control of the recorder. The C-callable API (application programming interface) that comes with SystemFlow also allows users to integrate the recorder as a high-performance server front end to a larger system.
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek develops, manufactures and markets innovative DSP systems and recorders to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe boards for data acquisition, software radio and digital signal processing featuring Texas Instruments C6000 DSPs, Freescale G4 PowerPCs and Xilinx FPGAs. Pentek's I/O includes A/Ds, D/As, FPGAs, digital up/downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
###
Pentek, Talon and SystemFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=158
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Elexo in France at (33) 0141 22 1023, Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969,MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
According to Rodger Hosking, vice president of Pentek, “Many of our customers have sensors and computer systems communicating massive amounts of digital data over a network and they need a way to capture that information for archiving or post-mission analysis. Our new Talon line of digital recorders addresses that need. The first in the family, the RTS 2715, handles 10GbE with a variety of data protocols and physical interface types in a commercial-grade configuration. Ruggedized versions and other configurations are on the horizon.”
The RTS 2715 can capture one or two simultaneous 10GbE data streams, guaranteeing zero data loss with an aggregate recording rate up to 2 Gbytes/sec. It accepts either TCP or UDP data packet protocols and stores data to files on a RAID disk array. The RTS 2715 can also play data back from its drives, streaming it over the 10GbE channels using either protocol. An optional GPS module provides time and position stamping during data capture.
Multiple Interface and Recording Options
The RAID drives are hot-swappable, allowing virtually unlimited data capture capacities. Because the files are stored in a NTFS (new technology file system) format, users can read the files on a standard Windows-based computer system, eliminating the need for file format conversion. Two Gigabit Ethernet ports, four USB ports and a built-in optical disk drive provide alternatives for off-loading data.
Drives are available in several different configurations, supporting RAID levels of 0, 1, 5, 10, or 50 with up to 20 Terabytes (TB) of data storage. Single-channel recorders are available in 5 TB, 10 TB, and 20 TB versions using up to 24, 3.5” hard disk drives (HDD). A 2 TB version uses up to eight solid-state drives (SSD). Dual-channel recorders include 10 TB and 20 TB HDD and 3 TB SSD versions. Both 4U and 5U rack mount chassis configurations are offered.
Customers can specify any of three popular physical interface options for the 10GbE connections. The CX4 interface supports Twinax copper cabling for run lengths up to15m. Optical interfaces operating at 850nm using LC connectors are available for either multi-mode fiber cables up to 300m long or single-mode fiber cables for run lengths up to 10km.
Built-in Workstation
The RTS 2715 is built on a server-class Windows 7 Professional workstation with a 1.8 GHz Intel® Core™ i7 processor and 2 GB of SDRAM. This workstation comes pre-loaded with Pentek’s SystemFlow Recording Software, which provides a simple and intuitive GUI (graphical user interface) for system configuration and control that shares the look and feel of other Pentek Talon recording systems. Users can store custom configurations as profiles for single-click setup, and use the Gigabit Ethernet interface for remote control of the recorder. The C-callable API (application programming interface) that comes with SystemFlow also allows users to integrate the recorder as a high-performance server front end to a larger system.
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek develops, manufactures and markets innovative DSP systems and recorders to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe boards for data acquisition, software radio and digital signal processing featuring Texas Instruments C6000 DSPs, Freescale G4 PowerPCs and Xilinx FPGAs. Pentek's I/O includes A/Ds, D/As, FPGAs, digital up/downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
###
Pentek, Talon and SystemFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=158
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Elexo in France at (33) 0141 22 1023, Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969,MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
Contact
Pentek, Inc.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Contact
Categories