Pentek Launches High-Performance, Real-Time PC Development System for Software Radio Applications
*Immediately start application development on fully-tested system *Assembled and pre-configured for Pentek Cobalt and Onyx PCIe boards *Rackmount PC workstation with Windows 7 Professional or Linux Operating Systems *ReadyFlow drivers and board support libraries installed
Upper Saddle River, NJ, May 02, 2013 --(PR.com)-- Pentek, Inc., today announced the launch of its Model 8266 PC development system, pre-configured to speed application development for the expansive family of Pentek Cobalt® Virtex-6 and Onyx® Virtex-7 FPGA PCI Express software radio and data acquisition I/O boards. The 8266 is delivered with the selected Pentek hardware configured for either Windows 7 Professional or Linux operating systems along with ReadyFlow® BSP drivers and software examples, fully installed and tested. Upon delivery, the system allows development engineers to immediately run example applications out-of-the-box.
“The Model 8266 is offered as a standard pre-integrated platform, saving our customers valuable time and cost in selecting, assembling and configuring components for a high-performance, real-time development system,” stated Rodger Hosking, vice president of Pentek. “We resolve the typical hardware, operating system and software compatibility obstacles inherent in new PC development platforms. All hardware is installed in appropriate slots, fully configured with proper cabling, power and cooling strategies, and optimized BIOS and operating system settings. The customer simply needs to remove the system from the package and start developing. As an added benefit, the tested and proven configuration of the Model 8266 streamlines Pentek customer support.”
Pentek collaborates with customers to select from the extensive family of 786xx Cobalt® and 787xx Onyx® PCI Express modules and then evaluates system requirements to define the Model 8266 configuration most appropriate for the final application.
ReadyFlow Software
Pentek ReadyFlow drivers and board support libraries are preinstalled and tested with the Model 8266. ReadyFlow includes example applications with full source code, a command line interface for custom control over hardware, and Pentek’s Signal Analyzer, a full-featured analysis tool that continuously displays live signals in both time and frequency domains.
System Implementation
Built on a professional 4U rackmount workstation, the Model 8266 is equipped with the Intel Core i7® processor, DDR3 SDRAM and a high-performance PCIe motherboard. These features accelerate application code development and provide unhindered access to the high-bandwidth PCIe links connecting the Cobalt and Onyx analog and digital I/O modules. All necessary coaxial and timing cables are installed and tested, providing SMA connectivity for all analog I/O lines. The Model 8266 can be configured with 64-bit Windows or Linux operating systems.
Pricing and Availability
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek, an ISO 9001:2008 certified company, designs, manufactures and markets innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, medical and industrial control applications. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs. Pentek’s high-speed real-time recording systems are pre-configured and can be used in the lab or deployed in the field. Pentek equips all boards and recorder products with high-performance I/O including gigabit serial interfaces, powerful software development tools and offers strong DSP software support.
Pentek, Cobalt, Oynx, and ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=176
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK, Spain and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
“The Model 8266 is offered as a standard pre-integrated platform, saving our customers valuable time and cost in selecting, assembling and configuring components for a high-performance, real-time development system,” stated Rodger Hosking, vice president of Pentek. “We resolve the typical hardware, operating system and software compatibility obstacles inherent in new PC development platforms. All hardware is installed in appropriate slots, fully configured with proper cabling, power and cooling strategies, and optimized BIOS and operating system settings. The customer simply needs to remove the system from the package and start developing. As an added benefit, the tested and proven configuration of the Model 8266 streamlines Pentek customer support.”
Pentek collaborates with customers to select from the extensive family of 786xx Cobalt® and 787xx Onyx® PCI Express modules and then evaluates system requirements to define the Model 8266 configuration most appropriate for the final application.
ReadyFlow Software
Pentek ReadyFlow drivers and board support libraries are preinstalled and tested with the Model 8266. ReadyFlow includes example applications with full source code, a command line interface for custom control over hardware, and Pentek’s Signal Analyzer, a full-featured analysis tool that continuously displays live signals in both time and frequency domains.
System Implementation
Built on a professional 4U rackmount workstation, the Model 8266 is equipped with the Intel Core i7® processor, DDR3 SDRAM and a high-performance PCIe motherboard. These features accelerate application code development and provide unhindered access to the high-bandwidth PCIe links connecting the Cobalt and Onyx analog and digital I/O modules. All necessary coaxial and timing cables are installed and tested, providing SMA connectivity for all analog I/O lines. The Model 8266 can be configured with 64-bit Windows or Linux operating systems.
Pricing and Availability
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek, an ISO 9001:2008 certified company, designs, manufactures and markets innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, medical and industrial control applications. Pentek offers powerful VME, VPX, VXS, PMC, XMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs. Pentek’s high-speed real-time recording systems are pre-configured and can be used in the lab or deployed in the field. Pentek equips all boards and recorder products with high-performance I/O including gigabit serial interfaces, powerful software development tools and offers strong DSP software support.
Pentek, Cobalt, Oynx, and ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=176
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK, Spain and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Beijing Betaone Sysjob Ltd. in China at (86) 10 82784106 and Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. In Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
Contact
Pentek, Inc.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Contact
Categories