Pentek Introduces Dual Channel Adaptive IF Relay XMC for Commercial and Military Communications
Relays 34 IF signals with modifications between input and output; Two 200 MHz 16-bit A/Ds, two 800 MHz 16-bit D/As; 34 DDCs and 34 DUCs (digital down- and upconverters); Signal functions for drop/add/replace, frequency shifts and hops, amplitude boost and attenuation.
Upper Saddle River, NJ, March 28, 2015 --(PR.com)-- Pentek, Inc., introduced the newest member of its Cobalt® line of XMCs (Switched Mezzanine Cards): the Model 71624 dual channel, 34 signal, adaptive IF (Intermediate Frequency) relay XMC with a Virtex-6 FPGA. As an IF relay, it accepts two IF analog input channels, modifies up to 34 signals, and then delivers them to two analog IF outputs. Any signal within each IF band can be independently enabled or disabled, and changed in both frequency and amplitude as it passes through the module.
The 71624 supports many useful functions for both commercial and military communications systems including signal drop/add/replace, frequency shifting and hopping, amplitude equalization, and bandwidth consolidation. Targeted applications include signal monitoring, signal jamming, channel security, countermeasures, beamforming and radar applications.
The Model 71624 features 34 digital down converters (DDCs), each independently tunable across a 100 MHz input IF range, handling signal bandwidths from 20 kHz up to 312 kHz. The DDCs deliver 34 baseband signals to the host computer, which determines how each signal is dropped, replaced, or changed in amplitude and frequency. The modified signals are then combined and delivered as an analog IF output.
“The flexibility of the Model 71624 allows each signal to be manipulated in its own way,” said Rodger Hosking, vice-president of Pentek. “Because the host computer is in the control loop, it supports adaptive applications such as signal scanning and tracking, as well as cognitive radio functions like jamming, denial of service and other countermeasures,” he added.
Adaptive Relay
The Model 71624 comes preconfigured with a suite of time-tested Pentek IP functions for DDC, DUC, DMA transfers and digital summation. Captured signals may be relayed with gain and frequency modifications directly through the module, or the host system may substitute a modified signal on any channel instead. The Model 71624 features an on-board programmable sample clock synthesizer that is phase-lockable to an external frequency reference input. Multiple units can be synchronized for high-channel count systems.
Form Factors, Development Systems & Software Support
The Cobalt Model 71624 XMC is designed for commercial, rugged or conduction cooled operating environments. It is also available in several form factors, including 3U and 6U VPX (52624/53624 & 57624/58624), 3U and 6U cPCI (72624/73624/74624), AMC (56624) and PCIe (78624).
With a Pentek SPARK® 8266 PC development system or 8267 VPX development system, designers can start working on their application immediately. Created to save engineers and system integrators the time and expense associated with building and testing a system, it ensures optimum performance of Pentek boards and working examples.
The Pentek ReadyFlow® Board Support Package is available for Windows and Linux operating systems. ReadyFlow is provided as a C-callable library, the complete suite of initialization, control and status functions, as well as a rich set of precompiled, ready-to-run-examples, accelerate application development.
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek, an ISO 9001:2008 certified company, designs and manufactures innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, defense, medical and industrial control applications. Pentek offers powerful VME, VPX, FMC, AMC, XMC, cPCI, and PCIe boards for data acquisition, software radio and digital signal processing featuring high-performance FPGAs. Pentek's I/O includes A/Ds, D/As, RF downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
Follow Pentek on LinkedIn
Follow Pentek on Twitter
Pentek, Cobalt, Spark and ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=200
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK, Spain and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Nanjing Inspire Electronics Technology in China and Hong Kong at (86) 151 6147 0785, Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, and Dynamic C4 Pte. Ltd. in Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
The 71624 supports many useful functions for both commercial and military communications systems including signal drop/add/replace, frequency shifting and hopping, amplitude equalization, and bandwidth consolidation. Targeted applications include signal monitoring, signal jamming, channel security, countermeasures, beamforming and radar applications.
The Model 71624 features 34 digital down converters (DDCs), each independently tunable across a 100 MHz input IF range, handling signal bandwidths from 20 kHz up to 312 kHz. The DDCs deliver 34 baseband signals to the host computer, which determines how each signal is dropped, replaced, or changed in amplitude and frequency. The modified signals are then combined and delivered as an analog IF output.
“The flexibility of the Model 71624 allows each signal to be manipulated in its own way,” said Rodger Hosking, vice-president of Pentek. “Because the host computer is in the control loop, it supports adaptive applications such as signal scanning and tracking, as well as cognitive radio functions like jamming, denial of service and other countermeasures,” he added.
Adaptive Relay
The Model 71624 comes preconfigured with a suite of time-tested Pentek IP functions for DDC, DUC, DMA transfers and digital summation. Captured signals may be relayed with gain and frequency modifications directly through the module, or the host system may substitute a modified signal on any channel instead. The Model 71624 features an on-board programmable sample clock synthesizer that is phase-lockable to an external frequency reference input. Multiple units can be synchronized for high-channel count systems.
Form Factors, Development Systems & Software Support
The Cobalt Model 71624 XMC is designed for commercial, rugged or conduction cooled operating environments. It is also available in several form factors, including 3U and 6U VPX (52624/53624 & 57624/58624), 3U and 6U cPCI (72624/73624/74624), AMC (56624) and PCIe (78624).
With a Pentek SPARK® 8266 PC development system or 8267 VPX development system, designers can start working on their application immediately. Created to save engineers and system integrators the time and expense associated with building and testing a system, it ensures optimum performance of Pentek boards and working examples.
The Pentek ReadyFlow® Board Support Package is available for Windows and Linux operating systems. ReadyFlow is provided as a C-callable library, the complete suite of initialization, control and status functions, as well as a rich set of precompiled, ready-to-run-examples, accelerate application development.
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek, an ISO 9001:2008 certified company, designs and manufactures innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, defense, medical and industrial control applications. Pentek offers powerful VME, VPX, FMC, AMC, XMC, cPCI, and PCIe boards for data acquisition, software radio and digital signal processing featuring high-performance FPGAs. Pentek's I/O includes A/Ds, D/As, RF downconverters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
Follow Pentek on LinkedIn
Follow Pentek on Twitter
Pentek, Cobalt, Spark and ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=200
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, RECAB AB in Sweden at (46) 8 6830300, Advanced Embedded Systems in the UK, Spain and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Nanjing Inspire Electronics Technology in China and Hong Kong at (86) 151 6147 0785, Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, and Dynamic C4 Pte. Ltd. in Singapore, Malaysia and Indonesia at (65) 6405 4506. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
Contact
Pentek, Inc.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Contact
Categories