Pentek’s New, Turn-Key FlexorSets Deliver Optical Interface Solutions for Radar, Communications and Data Acquisition Applications
*Four 250 MHz, 16-bit A/Ds and two 800 MHz, 16-bit D/As *GateXpress® supports dynamic FPGA reconfiguration *Optical backplane or cable interface *Integrated 3U VPX or PCIe solution with Virtex-7 FPGA *Ruggedized versions for harsh military environments available
Upper Saddle River, NJ, October 29, 2015 --(PR.com)-- Pentek, Inc., introduced two new products in its FlexorSet™ series of integrated FMC sub-systems combining its Flexor line of FMC modules and Virtex-7 FPGA FMC carriers. FlexorSets are preconfigured with optimized IP and fully supported with software development tools. The new FlexorSet Model 5973-312 for 3U VPX and Model 7070-312 for PCIe, utilize the Flexor Model 3312 4-Channel A/D and D/A FMC installed on either of two Flexor FMC carriers. These FlexorSets combine the high performance of the Virtex-7 and optical interconnects with the flexibility of the multichannel FMC data converter, creating a complete powerful radar and software radio sub-system.
“Combining FMCs and carriers from different vendors can be challenging. In addition to checking hardware compatibility, custom FPGA IP must be developed along with supporting software libraries. The FlexorSet product strategy of bundling FMCs, carriers, critical IP and software allows Pentek to deliver complete solutions ready to be integrated into the customer’s system,” said Bob Sgandurra, director of Product Management. He added, “Pentek also becomes the first supplier to offer VITA 66.4 backplane optical solutions on a VPX carrier and compatible optical cable interfaces on a PCIe FMC carrier.”
The Model 5973-312 3U VPX FlexorSet features a high pin-count VITA 57.1 FMC site, 4 GB of DDR3 SDRAM, PCI Express (Gen. 1, 2 and 3) interface up to x8, optional user-configurable gigabit serial I/O and optional LVDS connections to the FPGA for custom I/O. It delivers new levels of I/O performance by incorporating the emerging VITA 66.4 standard for half size MT optical interconnect, providing 12 optical duplex lanes to the backplane. With the installation of a serial protocol, the VITA-66.4 interface enables gigabit backplane communications between boards independent of the PCIe interface.
The Model 7070-312 PCIe FlexorSet features all of the same resources, except its optical interfaces are brought to MTP connectors compatible with industry standard cables.
Bundling for Seamless Integration
Both FlexorSets come pre-configured with a suite of built-in functions for data capture, synchronization, time tagging and formatting, all tailored and optimized for the FMC and carrier. This IP enables high performance capture and delivery of data to provide an ideal turn-key signal interface for radar, communications or general data acquisition applications, eliminating the integration effort typically left for the user when integrating the FMC and carrier.
Development Tools and Software Support
FlexorSet presents system integrators with an ideal development and deployment platform for custom IP. The Pentek GateFlow® FPGA design kit gives users access to the complete factory installed IP at the source level, allowing them to extend or even replace the built-in functions.
The Pentek GateXpress® PCIe configuration manager supports dynamic FPGA reconfiguration though software commands as part of the runtime application. This provides an efficient way to quickly reload the FPGA, which slashes development time during testing. For deployed environments, GateXpress enables reloading the FPGA without the need to reset the host system, ideal for applications that require dynamic access to multiple processing IP algorithms.
The Pentek ReadyFlow® Board Support Package is available for Windows and Linux operating systems. The ReadyFlow C-callable library contains a complete suite of initialization, control and status functions, as well as a rich set of precompiled, ready-to-run-examples, accelerate application development.
Form Factors, Pricing and Availability
FlexorSets are designed for air-cooled, conduction-cooled, and rugged operating environments. The FlexorSet Model 5973-312 for 3U VPX and the FlexorSet Model 7070-312 for PCIe both start at $19,490 USD. Delivery is 8-10 weeks ARO.
About Pentek
Pentek, Inc., an ISO 9001:2008 certified company, designs, manufactures and markets innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, medical and industrial control applications. Pentek offers powerful VME, VPX, VXS, PMC, XMC, FMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs. Pentek’s high-speed real-time recording systems are pre-configured and can be used in the lab or deployed in the field. Pentek equips all boards and recorder products with high-performance I/O including gigabit serial interfaces, powerful software development tools and offers strong DSP software support. For more information about Pentek, Inc. please visit www.pentek.com.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=205
Pentek, FlexorSet, GateXpress, ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com International Sales Contacts: International Sales Contacts: For a complete list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
“Combining FMCs and carriers from different vendors can be challenging. In addition to checking hardware compatibility, custom FPGA IP must be developed along with supporting software libraries. The FlexorSet product strategy of bundling FMCs, carriers, critical IP and software allows Pentek to deliver complete solutions ready to be integrated into the customer’s system,” said Bob Sgandurra, director of Product Management. He added, “Pentek also becomes the first supplier to offer VITA 66.4 backplane optical solutions on a VPX carrier and compatible optical cable interfaces on a PCIe FMC carrier.”
The Model 5973-312 3U VPX FlexorSet features a high pin-count VITA 57.1 FMC site, 4 GB of DDR3 SDRAM, PCI Express (Gen. 1, 2 and 3) interface up to x8, optional user-configurable gigabit serial I/O and optional LVDS connections to the FPGA for custom I/O. It delivers new levels of I/O performance by incorporating the emerging VITA 66.4 standard for half size MT optical interconnect, providing 12 optical duplex lanes to the backplane. With the installation of a serial protocol, the VITA-66.4 interface enables gigabit backplane communications between boards independent of the PCIe interface.
The Model 7070-312 PCIe FlexorSet features all of the same resources, except its optical interfaces are brought to MTP connectors compatible with industry standard cables.
Bundling for Seamless Integration
Both FlexorSets come pre-configured with a suite of built-in functions for data capture, synchronization, time tagging and formatting, all tailored and optimized for the FMC and carrier. This IP enables high performance capture and delivery of data to provide an ideal turn-key signal interface for radar, communications or general data acquisition applications, eliminating the integration effort typically left for the user when integrating the FMC and carrier.
Development Tools and Software Support
FlexorSet presents system integrators with an ideal development and deployment platform for custom IP. The Pentek GateFlow® FPGA design kit gives users access to the complete factory installed IP at the source level, allowing them to extend or even replace the built-in functions.
The Pentek GateXpress® PCIe configuration manager supports dynamic FPGA reconfiguration though software commands as part of the runtime application. This provides an efficient way to quickly reload the FPGA, which slashes development time during testing. For deployed environments, GateXpress enables reloading the FPGA without the need to reset the host system, ideal for applications that require dynamic access to multiple processing IP algorithms.
The Pentek ReadyFlow® Board Support Package is available for Windows and Linux operating systems. The ReadyFlow C-callable library contains a complete suite of initialization, control and status functions, as well as a rich set of precompiled, ready-to-run-examples, accelerate application development.
Form Factors, Pricing and Availability
FlexorSets are designed for air-cooled, conduction-cooled, and rugged operating environments. The FlexorSet Model 5973-312 for 3U VPX and the FlexorSet Model 7070-312 for PCIe both start at $19,490 USD. Delivery is 8-10 weeks ARO.
About Pentek
Pentek, Inc., an ISO 9001:2008 certified company, designs, manufactures and markets innovative COTS and rugged DSP boards and system recorders for commercial, government and military systems, including radar, communications, medical and industrial control applications. Pentek offers powerful VME, VPX, VXS, PMC, XMC, FMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs. Pentek’s high-speed real-time recording systems are pre-configured and can be used in the lab or deployed in the field. Pentek equips all boards and recorder products with high-performance I/O including gigabit serial interfaces, powerful software development tools and offers strong DSP software support. For more information about Pentek, Inc. please visit www.pentek.com.
For access to the release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=205
Pentek, FlexorSet, GateXpress, ReadyFlow are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; Telephone 201-818-5900, ext. 770; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com International Sales Contacts: International Sales Contacts: For a complete list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
Contact
Pentek, Inc.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Contact
Categories