Measuring Moisture Content in Medical Gases No Longer a Challenge
The Systech MM510 moisture analyser was chosen to solve this challenging but necessary requirement.
Thame, United Kingdom, October 15, 2015 --(PR.com)-- Medical Gas Solutions Ltd (MGS) design and manufacture lightweight, high-pressure valve, medical oxygen cylinders for the ambulance service, hospitals, medical centres and other emergency services. In order to provide the highest quality product, MGS follow the stringent requirements outlined in the European Pharmacopoeia standard 2.5.28, which state that there must be no more than 67ppm moisture present in the production of Medical Grade Oxygen. Therefore the measurement and analysis of moisture is essential in detecting and avoiding high levels of moisture contamination.
MGS turned to Systech Illinois and the MM510 Moisture analyser to measure the moisture and water vapour within their medical grade oxygen.
John Hennigan, Compliance Manager at Medical Gas Solutions says, “In my 11 years’ experience involved in the manufacture and quality control of medical gases, the accurate measurement of moisture content in medical gases has always been a challenge but a necessary requirement, in order to ensure that the medical gases manufactured meet the specification requirements of the relevant European Pharmacopoeia monographs for medical gases.”
The MM510 a electrolytic, phosphorous pentoxide (P2O5) moisture analyser is ideally suited to this requirement conforming to the European Pharmacopoeia standard. The moisture content in medical oxygen can range from less than 1ppm up to 60ppm, this challenging range can be accommodated by the MM510 which auto-ranges from 0.01 to 1000 ppm. It also offers the option of auto-calibration and incorporates a new, long life, P2O5 electrolytic moisture sensor of the highest quality.
Hennigan concluded; “I have found that the Systech Illinois MM510 moisture analyser is both accurate in its measure of moisture content and is very user friendly, with an ergonomic design and high quality P2O5 electrolytic moisture sensor meaning downtime of the analyser due to servicing is greatly reduced.”
MGS turned to Systech Illinois and the MM510 Moisture analyser to measure the moisture and water vapour within their medical grade oxygen.
John Hennigan, Compliance Manager at Medical Gas Solutions says, “In my 11 years’ experience involved in the manufacture and quality control of medical gases, the accurate measurement of moisture content in medical gases has always been a challenge but a necessary requirement, in order to ensure that the medical gases manufactured meet the specification requirements of the relevant European Pharmacopoeia monographs for medical gases.”
The MM510 a electrolytic, phosphorous pentoxide (P2O5) moisture analyser is ideally suited to this requirement conforming to the European Pharmacopoeia standard. The moisture content in medical oxygen can range from less than 1ppm up to 60ppm, this challenging range can be accommodated by the MM510 which auto-ranges from 0.01 to 1000 ppm. It also offers the option of auto-calibration and incorporates a new, long life, P2O5 electrolytic moisture sensor of the highest quality.
Hennigan concluded; “I have found that the Systech Illinois MM510 moisture analyser is both accurate in its measure of moisture content and is very user friendly, with an ergonomic design and high quality P2O5 electrolytic moisture sensor meaning downtime of the analyser due to servicing is greatly reduced.”
Contact
Systech Illinois
Beth Faulkner
+44 01844 216838
www.systechillinois.com
Contact
Beth Faulkner
+44 01844 216838
www.systechillinois.com
Categories