GlacialPower Launches GP-LS45P Series: 40-48 Watt LED Drivers with IP67 Rating
With Active PFC, 90 to 305 VAC Input, 24 to 57 V DC output, and Three Dimming Modes.
San Francisco, CA, August 30, 2016 --(PR.com)-- GlacialPower, a division of LED technology manufacturer GlacialTech Inc, is pleased to announce a new series of 40 to 48 Watt LED Drivers with DC output ranging from 24 V DC up to 57 V DC. The GP-LS45P series accepts a wide input range from 90 to 305 VAC, to handle AC supply fluctuations.
Suitable for interior and exterior use, the GP-LS45P drivers are IP67 rated for dustproofing and waterproofing. Active power factor correction makes efficient use of mains electricity. The driver supports a constant current mode supporting three optional types of dimming. There are five models in the GP-LS45P series, which provide DC output of 24 V, 36 V, 42 V, 48 V and 57 V respectively, and output power ranging from 40 up to 48 Watts.
Efficient LED Drivers with Dimming Options
The GP-LS45P drivers not only provide active power factor correction for efficient use of mains power, they also provide high power output efficiency. These drivers are fully compliant with Stage 3 of the stringent ErP (EU) No. 1194/2012 directive, which aims to greatly enhance the efficiency of energy-related products.
For easy integration and maximum efficiency there are three dimming mode options available: DC or electronic potentiometer dimming from 0-10 V, PWM dimming from 0-10 V, and 0K to 100KΩ resistance dimming. As well as running very efficiently in normal operation, the GP-LS45P series drivers also use almost no electricity in standby mode – they provide a no load consumption of less than 0.5W at 230 VAC.
Smooth Output Voltage for Long LED Lifetime
Output voltage from the GP-LS45P series is smooth and stable, as shown by the minimal noise and ripple specifications: from 200 mV to no higher than 250 mV, depending on the model, resulting in steady and consistent LED lighting. These drivers also help your LEDs start up in an instant, with a setup time of less than 0.5 seconds at 230 VAC.
Tough and Reliable LED drivers
The GP-LS45P series of drivers have a very wide operating temperature range, from -30° C to 50° C. In addition, these LED drivers' rugged IP67 rated enclosures are waterproof and dustproof enclosure to ensure integrity and stability in challenging indoor and outdoor environments. Safety features include Over-Voltage Protection (OVP), Over-Current Protection (OCP), Short-Circuit Protection (SCP) and Over-Temperature Protection (OTP), ensuring both the safety and long service life of this LED driver.
Features:
Universal AC input 90~305VAC.
Built-in Active PFC Function.
Protections: OVP, OCP, SCP and OTP.
3 in 1 dimming option (DC 0-10 V / PWM / Resistor) in constant current mode.
IP67 rated enclosure.
Compliant with ErP EU_1194_2012, Stage 3 directives for energy related products.
No load consumption is less than 0.5 W.
Set up time is less than 0.5 Sec at 230VAC.
Specifications
Model No.
LS45P-24C(A)
LS45P-36C(A)
LS45P-42C(A)
LS45P-48C(A)
LS45P-57C(A)
Output
DC Voltage
24V
36V
42V
48V
57V
Constant Current Region
16 ~ 24V
24 ~ 36V
33 ~ 42V
33 ~ 48V
40 ~ 57V
Rated Current
1.85A
1.25A
1.05A
1A
0.7A
Current Tolerance
-5% ~ +5%
Rated Power
44.4W
45W
44.1W
48W
40W
Ripple & Noise (Max.)
200mV
250mV
250mV
250mV
250mV
Efficiency at 240Vac(Typ.)
85%
86%
86%
87%
87%
Voltage Tolerance
-1% ~ +5%
DC Dimming (Optional)
DC 0-10V or Electronic Potentiometer 0-10V
PWM Dimming (Optional)
Puls: Hi=10V Low=0V, Duty: 0%-100%, Fsw:0.5-3KHZ
Resistance Dimming (Optional)
0K-100KΩ
Set up time (Max.)
< 0.5 Sec / 230VAC at full load
No Load Consumption (Max.)
< 0.5W at 230 VAC
Input
Voltage Range
90VAC ~ 305VAC
Rated Volatge
100 ~ 240VAC / 277VAC (for North American Only)
Frequency Range
47 Hz ~ 63 Hz
AC Current (Max.)
0.6A at 100 ~ 240VAC / 0.25A at 277VAC for North American Only
Power Factor
≧ 0.98 at 120VAC / ≧ 0.93 at 240VAC/ ≧ 0.9 at 277VAC, at full load
Inrush Current (Max.)
COLD START 70A at 240VAC
Leakage Current
< 0.5mA / 240VAC
Read more about GP-LS45P in GlacialPower's website: http://www.glacialpower.com/products/led-driver-PFC2.htm#L6
About GlacialPower
GlacialPower, the power division of GlacialTech, manufactures Switch Mode Power Supply (SMPS) solutions for LED lighting applications. GlacialPower provides LED Drivers and power supplies with a wide wattage range for a variety of applications. GlacialPower power supplies use attractive and contemporary design to deliver quality products that possess innovative features and ease of usability for customers. For details, please visit atwww.GlacialPower.com or visit us on Facebook at www.facebook.com/GlacialTech/.
Suitable for interior and exterior use, the GP-LS45P drivers are IP67 rated for dustproofing and waterproofing. Active power factor correction makes efficient use of mains electricity. The driver supports a constant current mode supporting three optional types of dimming. There are five models in the GP-LS45P series, which provide DC output of 24 V, 36 V, 42 V, 48 V and 57 V respectively, and output power ranging from 40 up to 48 Watts.
Efficient LED Drivers with Dimming Options
The GP-LS45P drivers not only provide active power factor correction for efficient use of mains power, they also provide high power output efficiency. These drivers are fully compliant with Stage 3 of the stringent ErP (EU) No. 1194/2012 directive, which aims to greatly enhance the efficiency of energy-related products.
For easy integration and maximum efficiency there are three dimming mode options available: DC or electronic potentiometer dimming from 0-10 V, PWM dimming from 0-10 V, and 0K to 100KΩ resistance dimming. As well as running very efficiently in normal operation, the GP-LS45P series drivers also use almost no electricity in standby mode – they provide a no load consumption of less than 0.5W at 230 VAC.
Smooth Output Voltage for Long LED Lifetime
Output voltage from the GP-LS45P series is smooth and stable, as shown by the minimal noise and ripple specifications: from 200 mV to no higher than 250 mV, depending on the model, resulting in steady and consistent LED lighting. These drivers also help your LEDs start up in an instant, with a setup time of less than 0.5 seconds at 230 VAC.
Tough and Reliable LED drivers
The GP-LS45P series of drivers have a very wide operating temperature range, from -30° C to 50° C. In addition, these LED drivers' rugged IP67 rated enclosures are waterproof and dustproof enclosure to ensure integrity and stability in challenging indoor and outdoor environments. Safety features include Over-Voltage Protection (OVP), Over-Current Protection (OCP), Short-Circuit Protection (SCP) and Over-Temperature Protection (OTP), ensuring both the safety and long service life of this LED driver.
Features:
Universal AC input 90~305VAC.
Built-in Active PFC Function.
Protections: OVP, OCP, SCP and OTP.
3 in 1 dimming option (DC 0-10 V / PWM / Resistor) in constant current mode.
IP67 rated enclosure.
Compliant with ErP EU_1194_2012, Stage 3 directives for energy related products.
No load consumption is less than 0.5 W.
Set up time is less than 0.5 Sec at 230VAC.
Specifications
Model No.
LS45P-24C(A)
LS45P-36C(A)
LS45P-42C(A)
LS45P-48C(A)
LS45P-57C(A)
Output
DC Voltage
24V
36V
42V
48V
57V
Constant Current Region
16 ~ 24V
24 ~ 36V
33 ~ 42V
33 ~ 48V
40 ~ 57V
Rated Current
1.85A
1.25A
1.05A
1A
0.7A
Current Tolerance
-5% ~ +5%
Rated Power
44.4W
45W
44.1W
48W
40W
Ripple & Noise (Max.)
200mV
250mV
250mV
250mV
250mV
Efficiency at 240Vac(Typ.)
85%
86%
86%
87%
87%
Voltage Tolerance
-1% ~ +5%
DC Dimming (Optional)
DC 0-10V or Electronic Potentiometer 0-10V
PWM Dimming (Optional)
Puls: Hi=10V Low=0V, Duty: 0%-100%, Fsw:0.5-3KHZ
Resistance Dimming (Optional)
0K-100KΩ
Set up time (Max.)
< 0.5 Sec / 230VAC at full load
No Load Consumption (Max.)
< 0.5W at 230 VAC
Input
Voltage Range
90VAC ~ 305VAC
Rated Volatge
100 ~ 240VAC / 277VAC (for North American Only)
Frequency Range
47 Hz ~ 63 Hz
AC Current (Max.)
0.6A at 100 ~ 240VAC / 0.25A at 277VAC for North American Only
Power Factor
≧ 0.98 at 120VAC / ≧ 0.93 at 240VAC/ ≧ 0.9 at 277VAC, at full load
Inrush Current (Max.)
COLD START 70A at 240VAC
Leakage Current
< 0.5mA / 240VAC
Read more about GP-LS45P in GlacialPower's website: http://www.glacialpower.com/products/led-driver-PFC2.htm#L6
About GlacialPower
GlacialPower, the power division of GlacialTech, manufactures Switch Mode Power Supply (SMPS) solutions for LED lighting applications. GlacialPower provides LED Drivers and power supplies with a wide wattage range for a variety of applications. GlacialPower power supplies use attractive and contemporary design to deliver quality products that possess innovative features and ease of usability for customers. For details, please visit atwww.GlacialPower.com or visit us on Facebook at www.facebook.com/GlacialTech/.
Contact
GlacialTech
Tatiana Trosheva
+886-(0)2-2882-5577
http://www.glacialtech.com/
7F, No. 352, Sec. 2, Zhongshan Rd., Zhonghe Dist., New Taipei City, Taiwan, 235, R.O.C.
Contact
Tatiana Trosheva
+886-(0)2-2882-5577
http://www.glacialtech.com/
7F, No. 352, Sec. 2, Zhongshan Rd., Zhonghe Dist., New Taipei City, Taiwan, 235, R.O.C.
Categories