Pentek Introduces Evolutionary Jade Architecture with Navigator Design Suite Software Tools
Jade architecture with Xilinx Kintex Ultrascale FPGA offers price, power and processing performance advantages. Navigator Design Suite compatible with Xilinx’s Plug-and-Play Vivado IP Integrator expedites development. Four 200 MHz, 16-bit A/Ds with Four FPGA-based Digital Down Converters (DDCs).
Upper Saddle River, NJ, October 27, 2016 --(PR.com)-- Pentek, Inc., today introduced the new Jade™ family of XMC products. Evolved from the proven designs of the Pentek Cobalt® and Onyx® architectures, Jade is based on the Xilinx flagship Kintex UltraScale FPGA, which significantly raises the digital signal processing (DSP) performance by over 50%. Equally impressive are reductions in cost by 39% and power dissipation by 18%.
The Kintex UltraScale FPGA site can be populated with a range of FPGAs to match the specific requirements of the processing task, spanning the KU035 through KU115. The KU115 features 5520 DSP48E2 slices and is ideal for modulation/demodulation, encoding/decoding, encryption/decryption, and channelization of the signals between transmission and reception. For applications not requiring large DSP resources or logic, a lower-cost FPGA can be installed.
The Jade architecture supports an optional 5 GB bank of DDR4 SDRAM memory. User-installed IP along with the Pentek supplied DDR4 controller core within the FPGA can take advantage of the memory for custom applications. The board features a Gen.3 x8 PCIe interface along with eight additional gigabit serial lanes and LVDS general purpose I/O for custom solutions.
As the central feature of the Jade architecture, the FPGA has access to all data and control paths, enabling factory-installed functions including data multiplexing, channel selection, data packing, gating, triggering and memory control. The Jade architecture organizes the FPGA as a container for data processing applications where each function exists as an intellectual property (IP) module. The Navigator™ Design Suite was designed from the ground up to work with Pentek’s new Jade architecture and provides an unparalleled plug-and-play solution to the complex task of IP and control software creation and compatibility. The Navigator Design Suite consists of two components: Navigator FDK (FPGA Design Kit) for integrating custom IP into Pentek sourced designs and Navigator BSP (Board Support Package) for creating host applications. Users are able to work efficiently at the API level for software development and with an intuitive graphical interface for IP design.
“Our new Jade architecture gives our customers unprecedented levels of performance at significantly lower product cost,” said Rodger Hosking, vice president of Pentek. “We also developed new software development tools to align with the latest industry standards and Xilinx development tools, providing a more intuitive and productive development environment.”
The first product to be introduced using the Jade architecture is the Model 71861, an XMC module with four 200 MHz A/D channels and programmable multiband DDCs (digital downconverters). As with all Jade products, the Model 71861 is based on the Xilinx Kintex UltraScale FPGA family with FPGA choices to match price, power and processing performance needs. In addition to XMC, this product is also available in PCIe, 3U & 6U VPX, AMC, and 3U & 6U cPCI form factors, with versions for both commercial and rugged environments.
Navigator Design Suite Efficiencies Streamline IP Development
Today’s complex FPGAs require intuitive development tools to help manage and simplify IP development. Xilinx’s Vivado Design Suite® includes IP Integrator, the industry’s first plug-and-play IP integration design environment. Built around a graphical block diagram interface, IP Integrator allows IP developers to leverage existing IP by importing it into their block diagram design. Pentek’s Navigator FDK provides complete data acquisition and processing IP for a specific Jade board. When the design is opened in Vivado’s IP Integrator, the developer can access every component of the Pentek design, replacing or modifying blocks as needed for a specific application.
All blocks use industry standard AXI4 interfaces providing a well-defined format for custom IP to connect to the rest of the design. Each Navigator/Jade design includes User Blocks in the data flow path, ideal for inserting custom processing IP. Pentek IP blocks can be quickly integrated with IP from nearly any other source.
The Navigator FDK includes complete documentation, test benches and full VHDL source for developers who desire complete access to the IP. In addition to the IP specific to the supported Jade board, Navigator also includes processing blocks for some of the most commonly used algorithms.
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Please see: http://www.pentek.com
Pentek, Cobalt, Onyx, Jade, Navigator and SPARK are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the (full) release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=214
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; 201-818-5900; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com. International Sales Contacts: For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
The Kintex UltraScale FPGA site can be populated with a range of FPGAs to match the specific requirements of the processing task, spanning the KU035 through KU115. The KU115 features 5520 DSP48E2 slices and is ideal for modulation/demodulation, encoding/decoding, encryption/decryption, and channelization of the signals between transmission and reception. For applications not requiring large DSP resources or logic, a lower-cost FPGA can be installed.
The Jade architecture supports an optional 5 GB bank of DDR4 SDRAM memory. User-installed IP along with the Pentek supplied DDR4 controller core within the FPGA can take advantage of the memory for custom applications. The board features a Gen.3 x8 PCIe interface along with eight additional gigabit serial lanes and LVDS general purpose I/O for custom solutions.
As the central feature of the Jade architecture, the FPGA has access to all data and control paths, enabling factory-installed functions including data multiplexing, channel selection, data packing, gating, triggering and memory control. The Jade architecture organizes the FPGA as a container for data processing applications where each function exists as an intellectual property (IP) module. The Navigator™ Design Suite was designed from the ground up to work with Pentek’s new Jade architecture and provides an unparalleled plug-and-play solution to the complex task of IP and control software creation and compatibility. The Navigator Design Suite consists of two components: Navigator FDK (FPGA Design Kit) for integrating custom IP into Pentek sourced designs and Navigator BSP (Board Support Package) for creating host applications. Users are able to work efficiently at the API level for software development and with an intuitive graphical interface for IP design.
“Our new Jade architecture gives our customers unprecedented levels of performance at significantly lower product cost,” said Rodger Hosking, vice president of Pentek. “We also developed new software development tools to align with the latest industry standards and Xilinx development tools, providing a more intuitive and productive development environment.”
The first product to be introduced using the Jade architecture is the Model 71861, an XMC module with four 200 MHz A/D channels and programmable multiband DDCs (digital downconverters). As with all Jade products, the Model 71861 is based on the Xilinx Kintex UltraScale FPGA family with FPGA choices to match price, power and processing performance needs. In addition to XMC, this product is also available in PCIe, 3U & 6U VPX, AMC, and 3U & 6U cPCI form factors, with versions for both commercial and rugged environments.
Navigator Design Suite Efficiencies Streamline IP Development
Today’s complex FPGAs require intuitive development tools to help manage and simplify IP development. Xilinx’s Vivado Design Suite® includes IP Integrator, the industry’s first plug-and-play IP integration design environment. Built around a graphical block diagram interface, IP Integrator allows IP developers to leverage existing IP by importing it into their block diagram design. Pentek’s Navigator FDK provides complete data acquisition and processing IP for a specific Jade board. When the design is opened in Vivado’s IP Integrator, the developer can access every component of the Pentek design, replacing or modifying blocks as needed for a specific application.
All blocks use industry standard AXI4 interfaces providing a well-defined format for custom IP to connect to the rest of the design. Each Navigator/Jade design includes User Blocks in the data flow path, ideal for inserting custom processing IP. Pentek IP blocks can be quickly integrated with IP from nearly any other source.
The Navigator FDK includes complete documentation, test benches and full VHDL source for developers who desire complete access to the IP. In addition to the IP specific to the supported Jade board, Navigator also includes processing blocks for some of the most commonly used algorithms.
Pricing and Availability
For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Please see: http://www.pentek.com
Pentek, Cobalt, Onyx, Jade, Navigator and SPARK are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
For access to the (full) release and data sheets, please visit: http://www.pentek.com/whatsnew/viewrelease.cfm?index=214
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; 201-818-5900; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com. International Sales Contacts: For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
Contact
Pentek, Inc.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Contact
Categories