Pentek Introduces Rugged and Light-weight Portable Talon RF/IF Signal Recorder
*Digitizes up to four channels of analog RF/IF signals at 500 MS/sec; Built-in digital down-conversion with programmable bandwidth; Real-time aggregate recording rates up to 4.0 GB/s; SSD RAID storage capacity up to 30.7 TB using NTFS files; SystemFlow GUI control panel for fast, intuitive operation.
Upper Saddle River, NJ, November 28, 2016 --(PR.com)-- Pentek, Inc., today announced a new member of its popular family of Talon® RF/IF signal recording and playback systems. The Model RTR 2727A rugged portable recorder targets applications needing to record and reproduce high-bandwidth signals. A complete PC workstation, the RTR 2727A provides high data capacity and aggregate recording rates of up to 4.0 GB/s in a four-channel system.
The RTR 2727A offers up to sixteen hot-swap solid state drives (SSDs) with a combined capacity to 30.7 TB sustain hours of continuous recording. The system features recording and playback of RF/IF signal frequencies up to 700 MHz with signal bandwidths up to 200 MHz. Available data converters include 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and 800 MHz 16-bit D/As.
At the heart of the RTR 2727A are Pentek Cobalt® Series Virtex-6 software radio boards featuring A/D and D/A converters, DDCs (digital downconverters), DUCs (digital upconverters), and complementary FPGA IP cores. Optional GPS time and position stamping allows the user to record this critical signal information.
“The RTR 2727A offers nearly ten times the storage capacity of its predecessor in a 25% smaller package. Its SSDs, highly resistant to shock and vibration, and its optional DC power supply support operational environments for aircraft, ships, and vehicles,” said Rodger Hosking, vice-president of Pentek. “This portable instrument is ideal for IF/RF signal recording and playback in radar, communications and other high frequency applications.”
Rugged Construction
The RTR 2727A is housed in a rugged, lightweight chassis measuring only 16.0” W x 6.9” D x 13.0” H and weighing less than 30 pounds. This extremely portable workstation features 100% aluminum alloy construction, reinforced with shock absorbing rubber corners and an impact-resistant protective glass for the high resolution 17" LCD monitor.
The hot-swappable SSD array is available in configurations from 1.9 TB to 30.7 TB and supports RAID levels 0, 1, 5, or 6. The SSDs are meticulously qualified by Pentek for optimum use in rugged and portable applications. By using hot swappable solid-state drives, the recorders exhibit high immunity to shock and vibration for ground vehicles, ships and aircraft.
Available I/O includes VGA video, six USB 2.0 ports, two USB 3.0 ports and dual Gigabit Ethernet connections.
Ease of Operation
All Talon RTR Portable Recorders are built on a Windows 7 Professional workstation with an Intel Core i7 processor and provide both a GUI (graphical user interface) and API (Application Programmer’s Interface) to control the system. Systems are fully supported with Pentek’s SystemFlow software for system control and turn-key operation. The software provides a GUI with point-and-click configuration management and storage of custom configurations for single-click setup. The software also includes a virtual oscilloscope and signal analyzer to monitor signals before, during and after data collection.
Available Options, Evaluation Package and Pricing
The RTR 2727A offers an optional GPS receiver that allows users to time stamp recordings as well as store GPS position information. Other options include an 18 to 36 VDC power supply and a removable operating system drive. Pentek's SystemFlow Simulator software package, available for download for free, simulates the SystemFlow recording software, which is installed on all Talon recording systems. The simulator allows users to operate the standard GUI and the SystemFlow API. The free trial package is available for download here: http://pentek.com/systemflow/systemflow.cfm?HID2=HP#SystemFlowSimulator. Pentek has developed a video providing more details on the Talon "A" series portable recorders. http://www.pentek.com/video/ViewVideo.cfm?Index=19. For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek develops, manufactures and markets innovative DSP systems and recorders to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, FMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs, Texas Instruments C6000 DSPs, and Freescale G4 PowerPCs. Pentek's I/O includes A/Ds, D/As, FPGAs, Serial FPDP, LVDS, RF converters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
Pentek, SystemFlow, Cobalt and Talon are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
Follow Pentek on LinkedIn
Follow Pentek on Twitter
Follow Pentek on Facebook
Follow Pentek on Instagram on your Smart Phone
Follow Pentek on YouTube
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; 201-818-5900; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, Advanced Embedded Systems in the UK, Spain, France and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Nanjing Inspire Electronics Technology in China and Hong Kong at (86) 151 6147 0785, Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. in Singapore, Malaysia, Indonesia, Taiwan, Thailand and Vietnam at (65) 6405 4506, Unitronix Pty Ltd in Australia at (61) 2 4977 3511. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
The RTR 2727A offers up to sixteen hot-swap solid state drives (SSDs) with a combined capacity to 30.7 TB sustain hours of continuous recording. The system features recording and playback of RF/IF signal frequencies up to 700 MHz with signal bandwidths up to 200 MHz. Available data converters include 500 MHz 12-bit A/Ds or 400 MHz 14-bit A/Ds and 800 MHz 16-bit D/As.
At the heart of the RTR 2727A are Pentek Cobalt® Series Virtex-6 software radio boards featuring A/D and D/A converters, DDCs (digital downconverters), DUCs (digital upconverters), and complementary FPGA IP cores. Optional GPS time and position stamping allows the user to record this critical signal information.
“The RTR 2727A offers nearly ten times the storage capacity of its predecessor in a 25% smaller package. Its SSDs, highly resistant to shock and vibration, and its optional DC power supply support operational environments for aircraft, ships, and vehicles,” said Rodger Hosking, vice-president of Pentek. “This portable instrument is ideal for IF/RF signal recording and playback in radar, communications and other high frequency applications.”
Rugged Construction
The RTR 2727A is housed in a rugged, lightweight chassis measuring only 16.0” W x 6.9” D x 13.0” H and weighing less than 30 pounds. This extremely portable workstation features 100% aluminum alloy construction, reinforced with shock absorbing rubber corners and an impact-resistant protective glass for the high resolution 17" LCD monitor.
The hot-swappable SSD array is available in configurations from 1.9 TB to 30.7 TB and supports RAID levels 0, 1, 5, or 6. The SSDs are meticulously qualified by Pentek for optimum use in rugged and portable applications. By using hot swappable solid-state drives, the recorders exhibit high immunity to shock and vibration for ground vehicles, ships and aircraft.
Available I/O includes VGA video, six USB 2.0 ports, two USB 3.0 ports and dual Gigabit Ethernet connections.
Ease of Operation
All Talon RTR Portable Recorders are built on a Windows 7 Professional workstation with an Intel Core i7 processor and provide both a GUI (graphical user interface) and API (Application Programmer’s Interface) to control the system. Systems are fully supported with Pentek’s SystemFlow software for system control and turn-key operation. The software provides a GUI with point-and-click configuration management and storage of custom configurations for single-click setup. The software also includes a virtual oscilloscope and signal analyzer to monitor signals before, during and after data collection.
Available Options, Evaluation Package and Pricing
The RTR 2727A offers an optional GPS receiver that allows users to time stamp recordings as well as store GPS position information. Other options include an 18 to 36 VDC power supply and a removable operating system drive. Pentek's SystemFlow Simulator software package, available for download for free, simulates the SystemFlow recording software, which is installed on all Talon recording systems. The simulator allows users to operate the standard GUI and the SystemFlow API. The free trial package is available for download here: http://pentek.com/systemflow/systemflow.cfm?HID2=HP#SystemFlowSimulator. Pentek has developed a video providing more details on the Talon "A" series portable recorders. http://www.pentek.com/video/ViewVideo.cfm?Index=19. For the latest pricing and availability information, please contact Mario Schiavone by phone at (201) 818-5900 ext.229, or by email at mario@pentek.com.
About Pentek
Pentek develops, manufactures and markets innovative DSP systems and recorders to original equipment manufacturers, distributors and value-added resellers. Pentek offers powerful VME, VPX, VXS, PMC, XMC, FMC, cPCI, PCI, PCIe and AMC boards for data acquisition, software radio and digital signal processing featuring Xilinx FPGAs, Texas Instruments C6000 DSPs, and Freescale G4 PowerPCs. Pentek's I/O includes A/Ds, D/As, FPGAs, Serial FPDP, LVDS, RF converters and more. Pentek equips all products with high-performance I/O including gigabit serial interfaces and offers strong DSP software support.
Pentek, SystemFlow, Cobalt and Talon are trademarks or registered trademarks of Pentek, Inc. Brand or product names are registered trademarks or trademarks of their respective holders.
Follow Pentek on LinkedIn
Follow Pentek on Twitter
Follow Pentek on Facebook
Follow Pentek on Instagram on your Smart Phone
Follow Pentek on YouTube
North American Sales Contact: Mario Schiavone, Pentek, Inc., One Park Way, Upper Saddle River, NJ 07458-2311; 201-818-5900; Fax 201-818-5904; Email news@pentek.com; Website www.pentek.com.
International Sales Contacts: Galleon Embedded Computing in Germany at (49) 89 5908 2101, LVD Systems in Italy at (39) 011 966 1319, Advanced Embedded Systems in the UK, Spain, France and Portugal at (44) 0 1202 885 675, Sela Electronic Systems in Israel at (972) 3 6479969, MISH International in Japan at (81) 42-538-7650, Nanjing Inspire Electronics Technology in China and Hong Kong at (86) 151 6147 0785, Acetronix Co. Ltd. in Korea at (82) 24202343, ext. 106, Dynamic C4 Pte. Ltd. in Singapore, Malaysia, Indonesia, Taiwan, Thailand and Vietnam at (65) 6405 4506, Unitronix Pty Ltd in Australia at (61) 2 4977 3511. For a list of Pentek representatives and distributors, please visit http://www.pentek.com/contact/replist.pdf.
Media Contact:
Barbara Stewart
Patterson & Associates
480-488-6909
barbara@patterson.com
Contact
Pentek, Inc.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Mario Schiavone
201-818-5900
www.pentek.com
To schedule an interview with Rodger Hosking, please contact Patterson & Associates.
Contact
Categories