Recent Headlines
M12 Angled Connectors with Cage Clamp Termination
Binder-USA's 713, 715 and 825 series are now available in a shieldable right-angled version with a cage clamp connection. - November 28, 2007 - Binder-USA LP
Field Attachable 7/8" Connectors Now Accepts Larger Cable
Binder-USA is pleased to announce an expansion of a new version of the 820 series 7/8” threaded connectors. These cable plugs will now accept cables having an outer diameter of up to 14mm max. This provides more versatility for industries requiring connections for Fieldbus applications. The... - October 24, 2007 - Binder-USA LP
M9 Feed-Through Connectors Keep Panels Sealed
Binder-USA recently enhanced their 702 & 712 series connector product lines. - September 21, 2007 - Binder-USA LP
All-Plastic Industrial Connector Now Accepts Larger Cable
Binder-USA is pleased to announce the release of a new version of the 692 and 693 series connectors. Cable plugs will now accept multi-conductor cables having an outer diameter of up to 14mm max. Prior to this new development the largest acceptable cable diameter was 12mm. The larger cable... - September 19, 2007 - Binder-USA LP
Speech-Directed Guided Assembly from CAMI Research
CAMI Research's enhanced AutoBuild software provides guided assembly with speech for cable and wire harness manufacturing. During construction, the technician touches an unterminated wire using a probe, or finger with a wriststrap, and the software reads the intended connection point using high-quality synthetic speech. Also shown is a connector graphic with the target pin highlighted. - August 17, 2007 - CAMI Research Inc.
Protective Caps Seal M8 Threaded Connectors to IP67
Binder-USA is proud to announce the addition of M8 protective caps to their 718 and 768 series M8 connector product line. The protective caps, when applied to unmated connectors, ensure a protection rating of IP67. These caps are ideal for use in factory automation and process control... - August 17, 2007 - Binder-USA LP
Protective Caps Ensure 7/8" Connectors Stay Sealed to IP67
Binder-USA is pleased to announce the addition of protective caps to Binder’s 820/870 series 7/8” threaded connector system. These caps are designed to maintain an IP67 protection rating while connectors are in the unmated condition. The caps protect the connectors from the ingress... - August 09, 2007 - Binder-USA LP
M12 Panel Mount Connectors Now in Stainless Steel
Binder-USA is pleased to announce the development of stainless steel M12 threaded sockets. The addition of these parts to Binder’s 763 series provides customers with a complete range of stainless steel connectors, ideal for use in food processing, pharmaceutical manufacturing and other... - August 01, 2007 - Binder-USA LP
Binder-USA Offers Stainless Steel M12 Connectors
Binder-USA is proud to announce the release of a new stainless steel version of the 713 series M12 field attachable connector. The stainless steel housing provides a reliable and rugged interface ideal for use in harsh environment applications, food processing equipment and any application... - July 28, 2007 - Binder-USA LP
Enhanced M12 Connector Design Reduces Assembly Time
Binder-USA announces a design enhancement for the M12 shielded connectors within the 713, 715 and 825 series. This revised version reduces the amount of loose parts and reduces the number of assembly steps from 8 to 6 ensuring a quick and easy assembly. These improvements are made possible by... - July 14, 2007 - Binder-USA LP
Torque Wrench Ensures M12 Connectors are Properly Mated
Binder-USA announces the release of a new torque wrench designed to aid in connecting and disconnecting standard M12 field attachable cable connectors with hex shaped locking nuts. The tool is designed to ensure hex nuts are tightened to the correct torque value of 0.6Nm. The tool also allows... - July 14, 2007 - Binder-USA LP
ProtectConnect Names Stephen P. Anderson as New CEO
Stephen P. Anderson has been named Chief Executive Officer for ProtectConnect, a modular wiring systems device manufacturer, located in Irvine, California. Anderson's responsibilities will include oversight of all branding, customer service and product development for the company, plus maximization... - May 12, 2007 - ProtectConnect
Next Generation Software for CableEye Cable Test System
A major software upgrade has been released by CAMI Research for the CableEye cable and wire harness tester. Find defective, miswired, and intermittent cables instantly, before they damage your equipment or fail at your customer's site. - March 22, 2007 - CAMI Research Inc.
Binder 423 Series Provides Robust Connections for Industrial Applications
Binder-USA is proud to present the 423 series industrial connector to the North American market. The robust design of the 423 series make it the ideal connector system for demanding industrial applications requiring a small circular DIN connector. The 423 series is intermateable with Binder’s... - December 01, 2006 - Binder-USA LP
Binder-USA Releases Series 870 7/8" Molded Cable Connectors
Binder-USA is proud to announce the addition of overmolded connectors to the 7/8” threaded connector line. The overmolded connectors are part of Binder’s 870 series and are fully intermateable with the 820 series. The new overmolded connector series is available with 3, 4 or 5... - December 01, 2006 - Binder-USA LP
Binder-USA 763 Series M12 Connectors with Soldercup Contacts
Binder-USA is proud to announce the arrival of M12 male and female receptacles with soldercup contacts. The new design utilizing soldercup contacts allows users to self-solder wires having a non-standard length or color to sockets. Binder’s standard pre-wired sockets are available with 200mm... - December 01, 2006 - Binder-USA LP
Binder Introduces Field Attachable 7/8" Connectors
Binder-USA is proud to announce the release of their field wireable 820 series 7/8” threaded connectors. Field wireable connectors allow increased manufacturing flexibility and will mate with industry standard 7/8” threaded connectors. Binder’s 820 series 7/8” threaded... - December 01, 2006 - Binder-USA LP
Solenoid Valve Connectors Now Available with Metric Threads
Binder-USA is proud to announce to arrival of solenoid valve connectors with metric threads. The product line addition complies with the latest industry norm stating that new designs are to use only metric threaded connectors. Solenoid connectors are offered in three types/sizes – A, B... - December 01, 2006 - Binder-USA LP
Binder Releases New Product Catalog
Binder-USA is proud to announce the release of a new full-line product catalog. The new catalog simplifies product search by grouping like product families and related technical information. As an example, the M12 connector category now contains subcategories identifying insert coding (a-coding,... - December 01, 2006 - Binder-USA LP