Recent Headlines
New Solutions for Electronic Racks and Server Cabinets from FDB
FDB Panel Fittings introduce a full range of accessory solutions for Electronic Racks and Server Cabinets, including specialist handles, hinges, swinghandles, rod latches, door gasket, cable management devices and captive fasteners. - December 18, 2012 - FDB Panel Fittings
Roller Shoe for Flat Locking Rods
New Roller Shoe from EMKA for flat rod enclosure systems has a smooth operation and quick installation to standard 3mm x 14mm rods. - December 06, 2012 - EMKA (UK) Ltd.
New from FDB Panel Fittings – "Invisible" Hinges for Prestige and Office Doors
“Invisible” hinges from FDB Panel Fittings allow a door to be opened a full 180° whilst remaining very strong and unseen when closed. The larger version is suitable for substantial entrance doors with a smaller version available for interior doors. - December 02, 2012 - FDB Panel Fittings
New EMKA Compression Swinghandle for Caravans and Specialist Vehicles
Compact vibration-proof swinghandle from EMKA is ideal for the storage and access doors of caravans, gen sets, power packs and other specialist vehicles with light weight cladding. - November 25, 2012 - EMKA (UK) Ltd.
MutualScrew Offers 5% Discount on All Online Orders Through the End of 2012 - Promo Code "2012"
MutualScrew offers 5% discount on all online orders through the end of 2012 - Promo Code "2012" - November 15, 2012 - Mutual Screw & Supply Inc
High Speed Dust Cap from EMKA for Quarter-Turn Locks
EMKA’s Program 1000 dust cap for quarter-turn locks installed on high speed trains. - November 15, 2012 - EMKA (UK) Ltd.
New Vulcanised Rubber Wheeled Castors from Elesa
Elesa’s new RE-E2 industrial castor is a high performing light duty castor with soft wheels suited to most flooring types, including tiles, asphalt, cement-resin, expanded metal and even unpaved floor areas. - November 11, 2012 - ELESA (UK) Ltd
Motor Transport Vehicle Fasteners from FDB Panel Fittings
Motor transport vehicle fasteners from FDB Panel Fittings include hinges, slam locks and quarter-turn locks for secure fastening protected against vibrations and the mechanical demands placed upon these components. - November 10, 2012 - FDB Panel Fittings
EMKA’S Program 1000 Compact Compression Latch
The 1000 program compact compression latch from EMKA is ideal for enclosure manufacturers who require a vibration-resistant locking solution to suit small enclosures. - November 02, 2012 - EMKA (UK) Ltd.
Application Story - FDB Hinges – On the Waterfront in Cape Town
FDB Panel Fittings supplied compact concealed hinges for public information kiosks installed during the re-development of a run-down waterfront area in Cape Town, South Africa. - October 28, 2012 - FDB Panel Fittings
New Levelling Feet with Ground Fixing from ELESA
Elesa’s new levelling feet with ground fixing stop them from “walking” with the movement of the equipment or machine, maintaining alignment in production or transfer lines. - October 27, 2012 - ELESA (UK) Ltd
EMKA 1121 Lock Cam Ramp
Self-adhesive lock cam ramp from EMKA UK for standard lock installations with metal cams, for use in electrical/electronic enclosures and cabinets. - October 26, 2012 - EMKA (UK) Ltd.
New Commercial Vehicle Components and Accessories Catalogue from EMKA
The new Commercial Vehicle Components and Accessories Catalogue from EMKA UK features mechanical components including locks, handles, catches, emergency hammers, vents and cupholders. - October 18, 2012 - EMKA (UK) Ltd.
ELESA’S New Detent Position Hinges Know Their Place
The CFV glass reinforced polyamide detent hinge from Elesa UK will click and hold in any of four positions allowing unimpeded access to equipment. - October 17, 2012 - ELESA (UK) Ltd
New D-SNAP Technical Guide Book from FDB Panel Fittings
The new D-SNAP technology handbook available from FDB Panel Fittings illustrates how this innovative fixing and assembly system for the sheet metal and panel building industries can save time and money without using tools for construction of enclosures and mounting of hardware such as handles,... - October 14, 2012 - FDB Panel Fittings
Mutualscrew.com Unveils a Host of Upgrades Including Website Improvements and New, More Competetive Pricing
Mutual Screw & Supply recently unveiled a complete update of www.mutualscrew.com, making doing business with the company quicker, easier and more turnkey. Along with the website upgrades, Mutual has also instituted new pricing procedures, resulting in even better value for builders, contractors... - October 11, 2012 - Mutual Screw & Supply Inc
New Elesa Indexing Plungers with Clamp Plus Added Safety Function
Elesa’s new GN7336.7 indexing plunger with clamp knob and its sister GN7336.8 with clamping knob for simultaneously positioning, locking and making secure elements whose position needs to be changed. - October 03, 2012 - ELESA (UK) Ltd
FDB Consolidate Range of “Panel Fittings for Every Enclosure” with Rocfast Service Pack
The Rocfast custom assembly and packaging service from FDB Panel Fittings covers all the products in their profile, including locks, latches, hinges, handles, padlocks, support stays and seals/gaskets. - September 29, 2012 - FDB Panel Fittings
Hinging and Locking Products from FDB for the Railed Vehicle Industry
FDB Panel Fittings introduce specific hinging and locking products for the railed vehicle industry such as screw-on hinges, compression latches and quarter-turn lock with slotted insert. - September 21, 2012 - FDB Panel Fittings
Elesa – New Retracted Rest Spring Plungers Offer Safety and Security in One
New Retracted Rest Spring Plungers from Elesa UK offer safety and security in one, and are ideal for the location of machinery equipment in manufacturing, security locking in furniture and the component positioning of in-house service equipment. - September 21, 2012 - ELESA (UK) Ltd
New from FDB – Traditional British Panel Hinges
Updated and re-engineered traditional British panel hinges from FDB for control panels and enclosures. - August 26, 2012 - FDB Panel Fittings
Elesa at PPMA 2012, Hall 5, Stand No. E70
New products from Elesa UK at this year's PPMA Exhibition will include the PC panel support clamp for machinery guarding, the CFSW hinge with built-in safety switch, the MRT series of open adjustable handles and the DD50 mini digital indicators, as well as a full new range of stainless steel handles and knobs. - August 24, 2012 - ELESA (UK) Ltd
New Clamping Components Enhance Elesa’s Adjustable Mounting System
New clamping components from Elesa for their adjustable mounting system include a clamping base, sensor holding clamps, connecting tubes, L brackets, 2-way connecting clamps, flanged bolts and square mounting tubes. - August 19, 2012 - ELESA (UK) Ltd
EMKA – Developing Hardware Solutions for HVAC Cabinets
An extensive range of hardware solutions for HVAC cabinets from EMKA includes traditional T and L handles, lifting handles, heavy duty and adjustable hinges and a bridge clamp system for complete panel removal. - August 15, 2012 - EMKA (UK) Ltd.
Panel Fittings for Commercial Vehicles
Specialist panel fittings for commercial vehicles from FDB have a high degree of vandal-resistance with everything from quarter-turn locks to lock rods, cams and recessed handles. - August 12, 2012 - FDB Panel Fittings
New Clamping Hand Knobs from Elesa
Clamping Hand Knobs from Elesa for machine tools, jigs, disability aids, instrumentation mounts and positioning of fixtures for removal or re-positioning. - July 28, 2012 - ELESA (UK) Ltd
Rotacaster Newsletter Has Special Pricing Through Mid-August 2012
Rotacaster just released special pricing in the latest newsletter about the omniwheel. The last issue focused on the Rotatruck; the newest issue focuses on what powers all materials handling solutions…the aptly named Rotacaster. The Rotacaster was developed to improve on the swivel caster... - July 27, 2012 - Rotacaster Wheel Ltd.
FDB Introduces Panel Fittings for Special Vehicles
Panel fittings from FDB for special purpose vehicles such as fire fighting trucks, ambulances, police riot control vehicles and refuse trucks, include handles, gaskets and lock inserts. - July 27, 2012 - FDB Panel Fittings
A New Look at 19" Rack Access Control
EMKA UK take a new look at 19" rack access control with simple things like locks, handles, hinges, sealing, extending to their ELM electronic access and monitoring control system. - July 22, 2012 - EMKA (UK) Ltd.
Lobe Knobs with Cushioned Bolt from ELESA
Lobe Knobs with cushioned bolt from ELESA enable a strong clamping force while cushioning the surface contact and avoiding damage - July 13, 2012 - ELESA (UK) Ltd
FDB Launch a Useful New Book on "Latch and Hinge Technology for Industrial Use"
This useful free book from FDB Panel Fittings is packed with information on latch and hinge technology for industrial use. - July 12, 2012 - FDB Panel Fittings
Builders and Home Owners Alike Save 5% Through June Just in Time for Spring/Summer Jobs
Contractors and builders have ordered from Mutual Screw & Supply for decades, but now consumers are going where the pros go and shopping www.mutualscrew.com for its massive variety of fasteners. With spring building underway and round-the-house fix-ups in full swing, now is the time to stock... - June 05, 2012 - Mutual Screw & Supply Inc
From A (Antique Brass) to Z (Zinc), Mutual Screw & Supply Now Offering a Full Line of Fastener Finishes
Mutual Screw & Supply, with a massive online warehouse of more than 75,000 fasteners, is adding a wide variety of fastener finishes for its customers. Finishes typically serve two functions: To either increase the anti-corrosive properties of the fastener or to add a decorative or distinctive... - March 06, 2012 - Mutual Screw & Supply Inc
Mutual Screw & Supply Announces Expanded List of Materials for Fasteners to Meet Rising Customer Demand
FIVEOFF Promotion Continues through February - February 18, 2012 - Mutual Screw & Supply Inc
Wedge-Mill Tool Celebrates Its 30th Anniversary in 2012
Wedge-Mill Tool is very excited to announce they are celebrating its 30th anniversary this year. They have grown from a 1000 square foot facility to a 12,000 square foot building in Brighton, Michigan. Wedge-Mill Tool specializes in cutting tools, small close tolerance complex assembly parts and replacement parts for indexable tooling. WMT has been ISO certified since 1996 and now are AS9100 certified. - February 16, 2012 - Wedge-Mill Tool, Inc.
Every Fastener is on Sale During Mutual Screw & Supply's FIVEOFF Online Promotion
It's always better when it's Mutual, but now it's even better as everything in stock is discounted. When you place an order with Mutual Screw & Supply at www.mutualscrew.com, enter the promotion code FIVEOFF at checkout and receive 5 percent off your entire order. - January 18, 2012 - Mutual Screw & Supply Inc
No Passport Needed: Mutual Screw & Supply Opens Website Up to International Commerce
Now contractors, builders and manufacturers around the world can agree that "It's better when it's Mutual," as Mutual Screw & Supply has added international shipping capabilities to its website (www.mutualscrew.com). With 24-hour access to Mutual's complete, in-depth line-up of... - December 14, 2011 - Mutual Screw & Supply Inc
Specialist Machining Company Maryland Machine Selected to Work on 9/11 Memorial in Baltimore, Maryland
Maryland Machine, Machining Company, has announced that they have been selected by Ziger/Snead Architecture to complete reverse engineering work on a steel artifact from the Twin Towers, which will act as the centerpiece for a memorial to commemorate those from the state of Maryland who lost their lives lost on 9/11. - July 15, 2011 - Maryland Machine
Mutual Screw & Supply Launches the Next Generation eCommerce Website, Online Purchase Made Simple and Easy - 1 Click Checkout
Mutual Screw & Supply, a leading internet retailer and wholesaler of fasteners and hardware with over 75,000 fastener items on line, announced today the coming of their new and improved website: www.MutualScrew.com. This new website will be more user friendly and it will be easier to navigate... - April 22, 2011 - Mutual Screw & Supply Inc
Wolverine Machine Products Opening Their Doors at Their Facility and at an Expo
Wolverine Machine exhibited at the Design-2-Part show in Akron Ohio on October 6th and 7th. Exhibiting next to other services and part suppliers, Wolverine Machine drew attention to their booth by creating a 10 foot dragon on their water jet that included fog from its mouth and blazing eyes. - October 20, 2010 - Wolverine Machine Products
Wolverine Machine Products Helps to Build University of Michigan's Solar Car
Wolverine Machine Products in Holly Michigan donated their time and money to help the University of Michigan develop a solar car. This solar car began a race on June 20th and came to a finish on June 26th where the University of Michigan's crossed the finish line in 1st place. The solar car named... - July 25, 2010 - Wolverine Machine Products
Wolverine Machine: Quality Magazine's Top 100 for the 2nd Consecutive Year
Wolverine Machine has landed on the Quality Magazine: Quality Leadership Top 100 list for the second consecutive year. Over 800 manufacturers participate in this list. Manufacturers are surveyed on criteria such as scrap and rework as a percentage of sales, warranty costs as a percentage of sales,... - May 21, 2010 - Wolverine Machine Products
Wolverine Machine Releases Water Jet Cutting Brochure
Wolverine Machine Products, located in Holly, Michigan has just released a brochure highlighting the capabilities and benefits of using water jet cutting in manufacturing. The new brochure can be viewed directly from the company’s website. Wolverine Machine houses two of the largest water... - March 20, 2010 - Wolverine Machine Products
Wolverine Machine Announces the Launch of E-Newsletter
Wolverine Machine Products, a certified ISO/TS 16949 precision machining company based in Holly, Michigan announced today the launch of a new e-newsletter. The Cutting Edge will be distributed monthly starting March 2010. The publication addresses issues such as safety, quality, employee relations,... - February 28, 2010 - Wolverine Machine Products
Wolverine Machine Purchases New CMM to Increase Quality Assurance
It has long been Wolverine Machine’s strategy to focus on high-quality, value-added processes in order to remain successful. For many years, Wolverine Machine has used Coordinate Measuring Machines (CMMS) in addition to many other quality assurance measures. CMMs are highly accurate machines... - February 17, 2010 - Wolverine Machine Products
Wolverine Machine and U of M Solar Car Presented at NAIAS
The University of Michigan’s Solar Car Team is gearing up for this summer’s American Solar Challenge, a 7-day solar car race from Tulsa to Chicago to be held in late June this year. The U of M team has high hopes for this race as they are 5 time champions. U of M’s 2009 solar car,... - February 05, 2010 - Wolverine Machine Products
Certificate of Conformity - CN.CE.0302-12/08 - for CE Marking of August Screw Air Compressor
Issued by Eurocert as a Notified Body for Machinery Directive with Identification No. CE 1128. - May 12, 2009 - Ningbo Xinda Group AUGUST Screw Compressor Factory
Wedge-Mill Tool Announces a New Website
Wedge-Mill Tool is proud to announce a new website launched December 17, 2008. The website includes new features such as a survey, request for quote page, laser etching request form, more detailed descriptions of their products and services, customer testimonials, case studies, and the latest news. - December 31, 2008 - Wedge-Mill Tool, Inc.
AUGUST Compressor the Famous and Widely Exported Rotary Screw Air Compressor of Ningbo Xinda Group, is Now Also Available in Saudi Arabia and UAE
Together with Sahara Trading SharJah UAE, AUGUST Compressor Brand will be show-cased at the Saudi Build 2008 Exhibition 26-29 October 2008 at the Riyadh International Exhibition Center. Saudi Build 2008 is the leading international trade exhibition catering to this lucrative sector. Over 24,000... - October 21, 2008 - Ningbo Xinda Group AUGUST Screw Compressor Factory
Keystone Industries, Inc. New K Series Hot Melt Adhesive Dispensing Systems
Available for Everyone January, 2009. The K Series line of Hot Melt Systems is designed for efficiency and ease. Keystone Industries has been servicing and restoring hot melt equipment since 1990 and Keystone's professional technicians have a combined 50 years of experience working on this type of equipment. This unit will save valuable budget dollars and reduce downtime, therefore, increasing production and profitability. - October 04, 2008 - Keystone Industries, Inc.