Recent Headlines
Within Gasket, Packing, & Sealing Device Manufacturing

Hernon Manufacturing’s Pipe Sealant Approved by TerraCair for DEF Equipment Suppliers List

Dripstop® 940, a containment-free anaerobic pipe sealant, has been added to TerraCairs’ list of approved DEF Equipment Suppliers who are compliant for use with DEF. - November 28, 2012 - Hernon Manufacturing

Hernon Manufacturing Announces Acceptance to the Petroleum Equipment Institutes’ Association

As a manufacturer of Dripstop® 940, an anaerobic pipe sealant, which has been validated DEF compatible, Hernon Manufacturing has been accepted into the PEI Association. - November 28, 2012 - Hernon Manufacturing

New EMKA Compression Swinghandle for Caravans and Specialist Vehicles

Compact vibration-proof swinghandle from EMKA is ideal for the storage and access doors of caravans, gen sets, power packs and other specialist vehicles with light weight cladding. - November 25, 2012 - EMKA (UK) Ltd.

High Speed Dust Cap from EMKA for Quarter-Turn Locks

EMKA’s Program 1000 dust cap for quarter-turn locks installed on high speed trains. - November 15, 2012 - EMKA (UK) Ltd.

Motor Transport Vehicle Fasteners from FDB Panel Fittings

Motor transport vehicle fasteners from FDB Panel Fittings include hinges, slam locks and quarter-turn locks for secure fastening protected against vibrations and the mechanical demands placed upon these components. - November 10, 2012 - FDB Panel Fittings

Hernon Manufacturing Welcomes Western United States Salesperson

Recently, Hernon Manufacturing welcomed Scot Srodes to the Hernon Manufacturing family to enhance their sales and support teams. - November 09, 2012 - Hernon Manufacturing

Hernon Manufacturing Unveils Shotgun Ammunition Sealing Machine

Hernon Manufacturing representatives will be attending the 2013 SHOT Show to educate conference attendees about its Shotgun Ammunition Sealing Machine and other eco-friendly ammunition sealants and dispensing equipment. - November 07, 2012 - Hernon Manufacturing

EMKA’S Program 1000 Compact Compression Latch

The 1000 program compact compression latch from EMKA is ideal for enclosure manufacturers who require a vibration-resistant locking solution to suit small enclosures. - November 02, 2012 - EMKA (UK) Ltd.

Application Story - FDB Hinges – On the Waterfront in Cape Town

FDB Panel Fittings supplied compact concealed hinges for public information kiosks installed during the re-development of a run-down waterfront area in Cape Town, South Africa. - October 28, 2012 - FDB Panel Fittings

EMKA 1121 Lock Cam Ramp

Self-adhesive lock cam ramp from EMKA UK for standard lock installations with metal cams, for use in electrical/electronic enclosures and cabinets. - October 26, 2012 - EMKA (UK) Ltd.

Hernon Manufacturing Educates Attendees of PEI Convention About DEF Compatible Thread Sealant

Hernon Manufacturing representatives attended the 2012 PEI Convention to educate the industry about its validated DEF compatible anaerobic pipe sealant called Dripstop® 940. Testing confirmed that Dripstop® 940 was containment free to ISO-22241 standards and therefore compatible for DEF technology. - October 24, 2012 - Hernon Manufacturing

New Commercial Vehicle Components and Accessories Catalogue from EMKA

The new Commercial Vehicle Components and Accessories Catalogue from EMKA UK features mechanical components including locks, handles, catches, emergency hammers, vents and cupholders. - October 18, 2012 - EMKA (UK) Ltd.

New D-SNAP Technical Guide Book from FDB Panel Fittings

The new D-SNAP technology handbook available from FDB Panel Fittings illustrates how this innovative fixing and assembly system for the sheet metal and panel building industries can save time and money without using tools for construction of enclosures and mounting of hardware such as handles,... - October 14, 2012 - FDB Panel Fittings

FDB Consolidate Range of “Panel Fittings for Every Enclosure” with Rocfast Service Pack

The Rocfast custom assembly and packaging service from FDB Panel Fittings covers all the products in their profile, including locks, latches, hinges, handles, padlocks, support stays and seals/gaskets. - September 29, 2012 - FDB Panel Fittings

Hinging and Locking Products from FDB for the Railed Vehicle Industry

FDB Panel Fittings introduce specific hinging and locking products for the railed vehicle industry such as screw-on hinges, compression latches and quarter-turn lock with slotted insert. - September 21, 2012 - FDB Panel Fittings

Hernon Manufacturing and Bliss Clearing Niagara Sign Cooperation Agreement

Hernon Manufacturing adds BCN as an authorized integrator for its ammunition sealing equipment. - September 13, 2012 - Hernon Manufacturing

Hernon Manufacturing Receives ITAR Registration

Having completed its U.S. State Department registration review, Hernon Manufacturing has received ITAR Registration. - August 31, 2012 - Hernon Manufacturing

Hernon Manufacturing Named "Florida Companies to Watch" Award Winner

Selected from more than 400 nominees and 104 finalists, Hernon Manufacturing prevailed to receive the distinction of being named as one of the Companies to Watch in 2012 - August 31, 2012 - Hernon Manufacturing

Hernon Manufacturing Wins William C. Schwartz Industry Innovation Award

Hernon Manufacturing has been selected as a William C. Schwartz Industry Innovations Award recipient, representing Seminole County. - August 31, 2012 - Hernon Manufacturing

Hernon Manufacturing and Redelease Form Joint Venture

Joint venture agreement with Brazilian company will initially supply the industrial sector with 200 of Hernon's adhesive and sealant formulations. - August 31, 2012 - Hernon Manufacturing

Additional Hernon Manufacturing Formulations Receive NSF Approval for Drinking Water

NSF International has certified that several more of Hernon products conform to the requirements of NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects. - August 31, 2012 - Hernon Manufacturing

Hernon Manufacturing Formulations Receive NSF Approval for Drinking Water

NSF International certified that several Hernon products conform to the requirements of NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects. - August 31, 2012 - Hernon Manufacturing

New from FDB – Traditional British Panel Hinges

Updated and re-engineered traditional British panel hinges from FDB for control panels and enclosures. - August 26, 2012 - FDB Panel Fittings

International Marine Industry Fair - SMM Hamburg - GEA Heat Exchangers

Between 4 and 7 September there will be held in Hamburg the most important trade fair for the shipbuilding, machinery and marine technology sector. This exhibition will present the latest developments in the marine industry. In this exhibition the heat exchangers division of GEA (GEA Heat... - August 22, 2012 - Laygo

World Brewing Congress 2012 - Portland - Laygo Gaskets for Brewing Industries

The international congress was held from the 28 of July to the 1st of august gathering the most important brewing industry professionals. - August 16, 2012 - Laygo

EMKA – Developing Hardware Solutions for HVAC Cabinets

An extensive range of hardware solutions for HVAC cabinets from EMKA includes traditional T and L handles, lifting handles, heavy duty and adjustable hinges and a bridge clamp system for complete panel removal. - August 15, 2012 - EMKA (UK) Ltd.

Panel Fittings for Commercial Vehicles

Specialist panel fittings for commercial vehicles from FDB have a high degree of vandal-resistance with everything from quarter-turn locks to lock rods, cams and recessed handles. - August 12, 2012 - FDB Panel Fittings

FDB Introduces Panel Fittings for Special Vehicles

Panel fittings from FDB for special purpose vehicles such as fire fighting trucks, ambulances, police riot control vehicles and refuse trucks, include handles, gaskets and lock inserts. - July 27, 2012 - FDB Panel Fittings

A New Look at 19" Rack Access Control

EMKA UK take a new look at 19" rack access control with simple things like locks, handles, hinges, sealing, extending to their ELM electronic access and monitoring control system. - July 22, 2012 - EMKA (UK) Ltd.

FDB Launch a Useful New Book on "Latch and Hinge Technology for Industrial Use"

This useful free book from FDB Panel Fittings is packed with information on latch and hinge technology for industrial use. - July 12, 2012 - FDB Panel Fittings

Hernon Manufacturing Introduces Eco-Friendly and U.S. Military Approved Ammunition Sealants

Environmentally friendly sealants, including Hernon's External Ammunition Sealant which meet and exceed the leak tests of the U.S. Army and the U.S. Navy, as well as other products and process equipment for the ammunition industry are now featured on the companies specialized website. - June 22, 2012 - Hernon Manufacturing

Sealing Products Manufacturer/Distributor Markets Form-in-Place, Chemically Resistant PTFE Joint Sealant

A form-in-place sealant, designed expressly for sealing expansion joints, has been added to AGIS, LLC’s line of sealing products for harsh service environments. The gasket, manufactured of 100% virgin, expanded PTFE, is a soft, compressible gasket material that conforms to almost any sealing surface-- even rough, scratched, and damaged surfaces. - June 19, 2012 - AGIS, LLC

Hernon Manufacturing's Anaerobic Pipe Sealant Ideal for DEF Applications

Independent lab test reports deem Dripstop® 940 containment free to ISO-22241 standards therefore it is ideal for use with Diesel Exhaust Fluid - June 09, 2012 - Hernon Manufacturing

Hernon Manufacturing Builds Relationships Overseas

Visiting South Korea and China, Hernon develops joint venture agreement, visits existing customers, secures new customers and orders. - May 29, 2012 - Hernon Manufacturing

Hernon Manufacturing Expands Throughout South Korea

Joint venture agreement provides local support and expansion of Hernon's vast product lines in South Korea. - May 23, 2012 - Hernon Manufacturing

Hernon Manufacturing Hosts Successful MACF Plant Tour

More than 80 from the Central Florida manufacturing sector attended Manufacturers Association of Central Florida plant tour at Hernon Manufacturing. - March 29, 2012 - Hernon Manufacturing

Hernon Manufacturing Receives Two Large Orders for Sealing and UV Curing Machine

Central Florida adhesive and dispensing equipment manufacturer to build sealant dispensing and UV curing machines for two defense & NATO contractors. - March 28, 2012 - Hernon Manufacturing

Hernon Manufacturing Welcomes New SolidWorks Mechanical Engineer

Chintan Patel joins the Hernon team as a vital component in company’s growth plan. - March 22, 2012 - Hernon Manufacturing

Hernon Manufacturing Celebrates 6,000 Fans on Facebook

Adhesive and sealant technology manufacturer reaches 6,000 "likes" on Facebook. - February 23, 2012 - Hernon Manufacturing

Hernon Manufacturing Welcomes New Regional Sales Manager

Michael Raykovitz joins the Hernon team to forge new customer relations as well as support existing customers in the Western United States. - February 14, 2012 - Hernon Manufacturing

Hernon Manufacturing Awarded 2012 ThinkGlobal Exporter of the Year

Adhesive, sealant and dispensing equipment manufacturer wins Exporter of the Year Award in the Materials category. - February 09, 2012 - Hernon Manufacturing

Announcing: The Louisville, Kentucky Shercon Distribution Center

Shercon, Inc. a leading masking solutions manufacturer is pleased to announce the recent opening of the company’s Midwest Distribution Center located in Louisville, Kentucky. - February 09, 2012 - Shercon, Inc.

Hernon Manufacturing Declares 2012 Las Vegas Shot Show a Success

Adhesive, sealant and dispensing equipment manufacturer forges new relationships, unveils new ammunition sealant dispensing and curing system at NSSF Shot Show. - January 31, 2012 - Hernon Manufacturing

Hernon Manufacturing Receives Large Order for Dispensing Equipment

Central Florida adhesive and dispensing equipment manufacturer to build sealant dispensing and UV curing machine for defense contractor. - January 06, 2012 - Hernon Manufacturing

Hernon Manufacturing Announces New Distributor for Florida

Miller Bearings to distribute over 5000 adhesive and sealant products for Sanford-based company. - January 06, 2012 - Hernon Manufacturing

Hernon Manufacturing Leases Additional Manufacturing Space Due to Rapid Growth

Adhesive, sealant and dispensing equipment company leases additional 3000 square feet while awaiting construction of new facility. - January 06, 2012 - Hernon Manufacturing

TOPOG-E® Series 2000 Boiler Gaskets Added to AGIS Same-Day Shipment Program

Suburban Philadelphia manufacturer/distributor of high temperature industrial sealing products extends its same-day shipment guarantee to include The TOPOG-E Gasket Company’s recently developed line of non-metallic high temperature boiler gaskets. - November 03, 2011 - AGIS, LLC

Recent Headlines Within Gasket, Packing, & Sealing Device Manufacturing

Recent Headlines
Within Gasket, Packing, & Sealing Device Manufacturing