Recent Headlines
Within Adhesive Manufacturing
New LED Flood Curing System for UV/Light Cure Materials from Intertronics
The new BlueWave® MX-250™ flood curing system from Intertronics offers the benefits of curing using UV LED technology, in a flood lamp configuration which has the power and control suitable for production. - November 29, 2017 - Intertronics
New Intertronics Duster Available to Meet 2018 F-Gas Regulations
The new Vortex 360° Renew Duster available from Intertronics is an answer for companies facing the restriction on technical aerosols using HFCs with a Global Warming Potential (GWP) greater than 150, which comes into effect on January 1 2018. - November 05, 2017 - Intertronics
Intertronics Advance Superior Adhesive Performance Through Plasma Surface Treatment
Intertronics explain how substantial increases in bond strength is achievable with the use of plasma surface treatment, which can improve adhesion on many substrates, including those which are seen as difficult to bond. - October 22, 2017 - Intertronics
Tech-Bond Solutions Announces a Breakthrough in Car Plastic Repair so Repairing Bumper Covers, Tabs, Etc. is No Longer a Problem
Tech Bond’s Bonding Poly Process™, a solution that took sixteen years to perfect, repairs torn or punctured bumper covers, cracked grills, broken headlamp tabs, trim pieces, etc., quickly, easily and permanently. - September 08, 2017 - Tech-Bond Solutions
Intertronics Precision Dispensing Helps Electrical Manufacturer to Reduce Waste
Precision epoxy dispensing from Intertronics helps electrical manufacturer to reduce waste by improving quality and yield. - August 25, 2017 - Intertronics
Intertronics Launch New Handheld Dispensing Valves for Cyanoacrylate Adhesives
New from Intertronics are two new dispensing valves suitable for cyanoacrylate adhesives as well as other volatile and/or low viscosity materials such as UV cure adhesives, solvents, varnishes, lacquers or inks. - August 11, 2017 - Intertronics
New Low Viscosity Conformal Coating from Intertronics Cures with Light
The new Dymax 9452-FC low viscosity conformal coating from Intertronics is an advanced electronics conformal coating and offers an instant UV and visible light cure with secondary heat cure for shadow areas within electronic assemblies. - July 28, 2017 - Intertronics
MPI Label Systems is Honored with 2016 Spirit of Excellence Award from Hormel Foods
MPI Label Systems was recently presented the Spirit of Excellence Award from Hormel Foods for demonstrating the highest levels of quality, delivery, service and customer support throughout the year. MPI was honored by a visit from the Hormel Foods Corporate Purchasing and Packaging team to present... - July 19, 2017 - MPI Label Systems
Automated Dispensing from Intertronics Helps Security Manufacturer Increase Throughput and Quality
Intertronics Fisnar Dispensing Robot with a pneumatic dispensing valve and the preeflow eco-PEN 600 precision volumetric, positive displacement dispensing pump, provides automated dispensing solution for GJD Manufacturing. - July 16, 2017 - Intertronics
UV/Visible Light Cure Maskant for Electronics – New from Intertronics
The new DYMAX Speedmask® 9-7001 maskant from Intertronics offers significant time saving in assembly of electronics connectors and other board level components to PCBs. - June 18, 2017 - Intertronics
Automation-Ready Plasma Surface Treatment from Intertronics
New from Intertronics is the automation-ready “i” version of the Relyon Piezobrush plasma treatment unit for use with automated production equipment and ready to be mounted on a robot or machine for semi-automated or automated applications. - June 11, 2017 - Intertronics
Solving the Productivity Puzzle with Technology and Training from Intertronics
Engineering adhesives specialist Intertronics explain how they work with their customers to enhance productivity in order to compete in both home and export markets. - May 19, 2017 - Intertronics
Nanoparticle Preparation from Intertronics with New Thinky NP-100 Nano Pulveriser
The Thinky NP-100 Nano Pulveriser from Intertronics breaks up particles using impact fragmentation, taking larger particles down to nano-size. It is suitable for nanomaterials including inorganic pigments, pharmaceutical compounds, drug and medicines, and battery materials. - April 29, 2017 - Intertronics
Thinky ARV-10K Twin Planetary Mixer from Intertronics - Mixing and Sub-Micron Degassing in 20 Litre Quantities
The Thinky ARV-10K planetary mixer from Intertronics has twin 10 litre containers for repeatable and fully homogenous mixing, combined with simultaneous deaeration and degassing down to sub-micron levels. - April 15, 2017 - Intertronics
BEST Products Prime the Market for Latest PS1 Flexible Paint Cup System
BEST, the new kid on the block in the world of refinishing consumables have just revealed a new flexible paint cup system which eliminates the traditional requirement of additional paint mixing pot and paper filter. This latest innovation from BEST launched Monday April 3rd. - April 11, 2017 - Direct Tool Company
Intertronics Meets the Challenges of Surface Activation with Piezobrush Pz2 Plasma Treatment
The Relyon Plasma Piezobrush® PZ2 from Intertronics for surface activation across a range of applications for improved adhesion on surfaces that are difficult to bond, print on, coat or laminate. - April 01, 2017 - Intertronics
New Nanoparticle Deagglomeration Technology from Intertronics
The new Thinky PR-1 Nanoparticle Dispersion Machine from Intertronics can disperse carbon nanotubes (CNT), graphene and other 2D nanomaterials. The machines uses mechanical rotation and multi-directional ultrasonics to achieve a rapid and even particle dispersion. - March 18, 2017 - Intertronics
Versatile, General Purpose, Industrial Epoxy Adhesives Now Available from Intertronics
IRS 2111 All-Purpose Epoxy Adhesive and 2112 Fast Curing General Purpose Epoxy Adhesive from Intertronics are simple to use two part epoxies which can be used for bonding, sealing and structural support applications. - March 05, 2017 - Intertronics
Automated Plasma Surface Treatment Package Available from Intertronics
Intertronics have created an integrated plasma surface treatment package which is being used for customer demonstrations and evaluations, and is also available for purchase as a turnkey automated workstation. - February 23, 2017 - Intertronics
MPI Label Systems Expands in North East with the Acquisition of Label Gallery, Inc.
MPI Label System expands into New York. - February 14, 2017 - MPI Label Systems
Radiometer Aids Process Control in Broad Spectrum or LED-Based UV Curing
The new DYMAX ACCU-CAL™ 160 Radiometer from Intertronics is designed to be used with both benchtop flood curing lamps and conveyorised systems, and comes in two versions for either broad spectrum or LED-based UV curing lamps. - January 29, 2017 - Intertronics
Intertronics Fast Cure, Easy Removal Temporary Mask for PCBs Aids Productivity
The new DYMAX Speedmask® UV/light cure temporary masking agent from Intertronics is designed to meet the needs of the electronics industry, where its fast cure and simple removal will improve productivity in printed circuit board assembly. - January 14, 2017 - Intertronics
Precision Mixing and Dispensing from Intertronics Facilitates Miniaturisation
The newly developed eco-DUO330, available from Intertronics, sets new standards in micro-dosing for two component systems and can provide dosages as small as 0.2 to 32ml/min with complete repeatability, precisely mixed and with exceptional control. - December 23, 2016 - Intertronics
New White Paper from Intertronics – Achieving the Benefits of LED UV Curing
Ensuring Success When Switching from Conventional Lamp to LED Light Curing Sources is a new white paper available from Intertronics. - November 20, 2016 - Intertronics
Justick Products Now Carried by Industry Leader, Smead, USA
Justick award-winning electrostatic boards are now carried by Smead Manufacturing Company, a leading organizational products company in the United States. “Justick International’s products are now widely available across the United States thanks to our newly appointed distributor,... - November 20, 2016 - Justick International
Mixing Silicones for Facial and Other Prosthetics
The Thinky ARE-250 from Intertronics mixing silicones for facial and other prosthetics at Coventry Hospital. - November 06, 2016 - Intertronics
Charred Collision Repair Centre Devastated in Fire Catastrophe Turned to Direct Tool Company to Douse the Flames
Williams Garage is the latest accident repair centre to fall victim to suspected arson attack in the Winchester area. Business owner Peter Whieldon entrusted DTC to put them back on their feet in an emergency recovery project. - October 29, 2016 - Direct Tool Company
Intertronics Announces Premium Dispensing Components Range
The QuantX™ premium dispensing components range available from Intertronics competes with other leading brands on quality, compatibility, price and delivery. - October 20, 2016 - Intertronics
Preeflow Volumetric Adhesive Dispensing from Intertronics Helps Ensure Integrity of Life-Saving Medical Device
Intertronics preeflow eco-DUO precision metering, mixing and dispensing system chosen by BPR Medical as dispensing solution to bond the adhesive for their Firesafe Cannula Valve. - October 18, 2016 - Intertronics
All-Star America’s Cup Yacht Racing Facility Fit Out by Specialist Supplier Direct Tool Company
Direct Tool Company chosen by prestigious America's Cup yacht racing team to supply, install and commission bespoke dust extraction and compressed air system. - October 12, 2016 - Direct Tool Company
Relyon Plasma PB3 Plasmabrush Available from Intertronics for Surface Treatment, Activation and Cleaning
The Relyon Plasma PB3 Plasmabrush from Intertronics offers convenient, high speed, high performance atmospheric plasma cleaning and surface activation. The PB3 Plasmabrush is a nozzle-type plasma generator which is particularly compact and offers long-term stability. Proprietary Pulsed Atmospheric... - September 24, 2016 - Intertronics
New Polytec PT Brochure from Intertronics
The new Polytec PT brochure from Intertronics has information on specialist epoxy resin adhesives and potting compounds for electronics, electrical engineering, optical and medical industries. - September 18, 2016 - Intertronics
DTC Fit Out World Class Composite Manufacturing Training Facility with Bespoke Dust Extraction System
Direct Tool Company excels in progressive composite manufacturing industry having surpassed expectations in fit out of Combined Composite Technologies’ training facility. - September 13, 2016 - Direct Tool Company
Speedy Scissor Lift Installation Project Lightens the Load for Thriving Truck Maintenance Facility
Direct Tool Company completes priority project for leading high-end large commercial vehicle maintenance centre. - September 04, 2016 - Direct Tool Company
New BlueWave MX-150 LED UV Spot Curing Lamp from Intertronics for Superfast Cures
Adhesives specialists Intertronics have introduced the new Dymax BlueWave® MX-150™ LED UV Spot Curing Lamp which offers the speed, consistency, reliability and long service life associated with LED UV curing. - September 02, 2016 - Intertronics
Complex Commercial Spray Booth Project Carried Out by Direct Tool Company for Thriving Train Maintenance Workshop
Arlington Fleet Services Ltd steps up operation with world class paint shop facility allowing for full livery schemes to be executed. - August 21, 2016 - Direct Tool Company
Black Opaque Conformal Coating from Intertronics Enhances Pcb Security
The new Dymax Multi-Cure 9451 from Intertronics is a a UV/light and heat cure coating suitable for most circuit assemblies. It enhances the security of electronic products by covering the printed circuit board and components, hiding them from visual inspection. - August 20, 2016 - Intertronics
Direct Tool Company Succeed as Expert Consultants on Bespoke Dust Extraction Solutions for Luxury Yacht Builders
Air quality control methods rapidly progress within yacht and composite workshops, production managers realise new affordable solutions offer an almost dust-free working environment. - August 07, 2016 - Direct Tool Company
New Thermally Conductive Adhesives from Intertronics
A new generation of thermally conductive two-part epoxy adhesives from Intertronics offer excellent thermal conductivity, so enhancing the effectiveness of heat paths found in applications such as LED heat sink attachment, chip assembly, encapsulation, potting of thermal sensors, assembly of power modules, connection of pipes in heat exchangers and the bonding and potting of battery cells and electric motors. - July 30, 2016 - Intertronics
Handheld Plasma Surface Treatment from Intertronics
The new Relyon Plasma PZ2 piezo brush® handheld surface treatment unit from Intertronics ionises atmospheric gas to plasma clean and activate surfaces for improved adhesion of adhesives, or wetting prior to printing or coating. - July 14, 2016 - Intertronics
Direct Tool Company Announces Plans for the Installation of a World Class Environmental Cleaning System for Luxury Yacht Builder
Sunseeker International seeks to improve working conditions and reduce carbon footprint. - July 10, 2016 - Direct Tool Company
Accuracy and Repeatability in Precision Dispensing and Dosing with preeflow® from Intertronics
New preeflow volumetric dispensing pumps available from Intertronics for the application of small quantities (microlitres) of adhesive to the dosing of fluids into vials. - June 27, 2016 - Intertronics
New Thinky ARE-400 Twin from Intertronics - Twice the Capacity
For production facilities and laboratories that want more mixing capacity, the latest machine is the Thinky ARE-400 Twin from Intertronics. It offers a load of up to 500ml/800g and will handle traditionally difficult-to-mix high viscosity liquids and powders. - June 12, 2016 - Intertronics
Caplinq Europe BV Signs Definitive Agreement to Represent Aculon in Europe, the Middle East, & Africa
CAPLINQ Europe BV announced that it will become Aculon’s European Order Fulfillment Agent and Market Partner to further promote its products to its customers in Europe, the Middle East and Africa. - June 08, 2016 - Aculon Inc
Intertronics Opens New Technology Centre for Trials, Demonstrations and Seminars
The new Intertronics Technology Centre is custom-designed for demonstrations and trials of adhesive materials, dispensing technologies, (including robots), curing devices and other equipment. - May 21, 2016 - Intertronics
RC Incorporated Acquires Heinrich Company
RC Incorporated, a family owned company that consists of multiple business units focused primarily in the manufacturing industry, completed the acquisition of Heinrich Company. The business will continue under the current name of Heinrich Company ("Heinrich" or the "Company")... - May 19, 2016 - RC Incorporated
Relyon Plasma Treatment Systems Now Available from Intertronics
Intertronics have recently announced a new sales partnership with plasma treatment company Relyon Plasma GmbH which brings their advanced technology within reach of UK manufacturers. Explained Intertronics M.D. Peter Swanson: “Plasma surface treatment can be a very effective way to activate... - May 07, 2016 - Intertronics
Intertronics Brings UV Post-Cure to 3D SLA Polymer Printing Technology
UV flood lamp and spot curing systems available from Intertronics for UV post-cure in 3D SLA polymer printing. - April 23, 2016 - Intertronics
New UV/Light Cure Masking Resin from Intertronics – Process Protection for Turbine Components
Intertronics have recently introduced DYMAX Speedmask® 718 UV/light cure masking resin which brings reliable, quick, effective application and simple removal to the protection of turbine blades, vanes and other components. - April 09, 2016 - Intertronics
Water White Optically Clear Epoxy Adhesive from Intertronics for Strong Bonds and Fast Cures
The new Opti-tec 5013 high performance, two-part epoxy from Intertronics is a water white clear general adhesive for bonding glass, ceramics, plastics and metals as well as some optical and opto-electronic applications. - March 25, 2016 - Intertronics