Recent Headlines
Within Machine Shops; Turned Product; & Screw, Nut, & Bolt Manufacturing
New EMKA 125° Pin Hinge with Stud Fixing and Retained Pivot for Cabinets and Enclosures
The new 1031 hinge from EMKA is quick to install with its integral stud fixing to the cabinet frame. The hinge is expected to be of value to users of cabinets, enclosures and housings for industrial controls or displays where door removal is required in the course of maintenance or re-configuration. - February 05, 2016 - EMKA (UK) Ltd.
New EMKA Quick Fit IP69 Fully Insulated Enclosure Lock
EMKA’s new Program 1000 IP69 lock is a snap together design with exceptional sealing and full electrical insulation. It is suitable for frequent wash down area applications such as those found in food processing situations. - January 23, 2016 - EMKA (UK) Ltd.
Laboratory Testing Inc. Approved as Commercial Testing Laboratory for Sandia National Lab
Commercial Testing Laboratory (CTL) approval was granted to Laboratory Testing Inc. by Sandia National Laboratories. This CTL allows LTI to perform a list of mechanical testing and chemical testing services according to stipulated test methods and specifications. - January 20, 2016 - Laboratory Testing Inc.
Stock and Staffing Expansion at FDB Panel Fittings
FDB are now stocking hundreds of new products, as well as additional stock of popular items serving the specialist panel builder and vehicle transport industries with locks, handles, hinges, cabinet sealing and other enclosure hardware in zinc die, reinforced plastics and stainless steel. - January 16, 2016 - FDB Panel Fittings
New Elesa MO Series Horizontal Toggle Clamps with Anti-Release Trigger
Elesa’s new MO series horizontal toggle clamps feature the MOAS and MOBS stainless steel designs with in-built safety latch which prevents accidental opening when subjected to strong vibrations or side forces. Their low profile is ideal for confined areas and for mounting on expansive flat... - January 10, 2016 - ELESA (UK) Ltd
Metallurgists at Laboratory Testing Inc. Receive GE Certification in Grain Size Evaluation
Two metallurgists from Laboratory Testing Inc. were certified by GE Aviation to perform Grain Size Evaluation. They successfully met the requirements of GE specification S-554 in order to perform evaluations in accordance with GE E50TF133 Issue S10. - January 10, 2016 - Laboratory Testing Inc.
New EMKA Guide to Electronic Locking Systems
EMKA have available a new guide to Electronic Locking and Monitoring Systems which gives an introduction to the rapidly developing field of IT data protection. The guide covers electro-mechanical locking, RFID card, PIN Code and fingerprint Bio-locking technologies. - January 09, 2016 - EMKA (UK) Ltd.
Three Long-Term Employees Retire from Laboratory Testing Inc.
Three Laboratory Testing Inc. employees with over 20 years’ experience recently retired and were recognized for their service at the company’s holiday luncheon. Although officially retired, two continue to work part-time hours at LTI. - January 08, 2016 - Laboratory Testing Inc.
Laboratory Testing Inc. Employee Receives ASTM Analytical Chemistry Committee Award
Lee Dilks, chemistry and metallography manager at Laboratory Testing Inc., received an Award of Appreciation at the ASTM Committee E01 semi-annual meeting for his role as Secretary of subcommittees E01.08 and E01.20. - December 25, 2015 - Laboratory Testing Inc.
FDB to Display Cabinet and Enclosure Hardware Accessories at Southern Manufacturing 2016
FDB Panel Fittings will display their range of cabinet and enclosure hardware accessories for the specialist panel builder at the Southern Manufacturing Exhibition in February 2016. On display will be ¼ turn locks, stainless steel hinges, compression locks, as well as wing and T handles. - December 24, 2015 - FDB Panel Fittings
EMKA Guide for Use, Application and Storage of Closed Cell Self-Adhesive Sponge Rubber
EMKA now have available a guide to processing information for the use, application and storage of closed cell self-adhesive sponge rubber gasket sealing sections which are used in the cabinet, enclosure and motor vehicle industries. - December 20, 2015 - EMKA (UK) Ltd.
Elesa UC Series Flange Mount Shaft Bearings – Self-Align for Easy Fitment
Elesa’s new UC range of self-aligning flange bearings offer easy installation for rotating shafts on equipment such as conveyor systems, where their tolerant fit and protected bearings enable quick, simple assembly or replacement. Natural shaft alignment up to ±2.5 degrees off centre,... - December 19, 2015 - ELESA (UK) Ltd
Giussani Pop-Out T Handles from FDB Panel Fittings
The new Giussani pop-out T handles from FDB Panel Fittings incorporate radial pin tumbler locks and offer the benefits of security with a traditional T style format, now updated to meet modern security and safety concerns. - December 13, 2015 - FDB Panel Fittings
EMKA Guide to Custom Sealing Profiles
The latest EMKA product guide details their in-house production of custom sealing profiles for cabinets, vehicles, HVAC, windows and general industrial purposes. This guide explains the materials they use, along with the processes and machinery which enable them to meet a wide range of... - December 12, 2015 - EMKA (UK) Ltd.
Elesa Bridge Pull Handle with Integrated Micro Switch for Remote Operation
Elesa’s new EBR-SW bridge pull handle enables remote electrical operation of safety interlocking and multiple latching systems while one-handedly opening the related door or safety panel. This is relevant to industrial controls in particular where its IP65 rating also ensures that the EBR-SW... - December 11, 2015 - ELESA (UK) Ltd
VisionASP’s Innovative Technology Solutions Highlighted on Worldwide Business with kathy ireland® Featuring software developed for Vineburg Machining Inc
MMP (USA) announces an exclusive Worldwide Business with kathy ireland® feature story on VisionASP. The story will focus on their innovative approach to technology solutions that put business owners and managers in control of current and future operations. - December 08, 2015 - Vineburg Machining Inc
Laboratory Testing Inc. Announces Continuation of Nadcap Accreditation
PRI has successfully audited Laboratory Testing Inc. of Hatfield, PA for continuation of the Lab’s Nadcap accreditations in Nondestructive Testing Services (liquid penetrant testing, magnetic particle inspection, ultrasonic testing) and Aerospace Quality Systems AC7004. - December 02, 2015 - Laboratory Testing Inc.
EBP Bridge Handles from Elesa with Anti-Microbial and Flexible Features
Elesa’s range of bridge type pull handles in glass fibre reinforced polyamide has two new versions – the .SAN, which provides anti-microbial protection, and the .FLX which has a flexible handle for use on curved surfaces. - November 28, 2015 - ELESA (UK) Ltd
Laboratory Testing Inc. Scheduled to Exhibit at Power-Gen International 2015
Laboratory Testing Inc. will display materials testing, nondestructive testing and failure analysis services in Booth #4645 during the Power-Gen International Expo in Las Vegas, NV on December 8-10, 2015. LTI’s wide-range of testing services are used to inspect construction materials for power sites and to analyze parts that fail. - November 19, 2015 - Laboratory Testing Inc.
Innovative Pneumatic Switch Bridge Pull Handle from Elesa UK
Elesa’s new EBR-PN bridge pull handle enables use of remote air control for interlocking, multiple latching systems etc. where electrical systems are not considered safe or where they may be subject to corrosion. - November 14, 2015 - ELESA (UK) Ltd
Fire Protection Silicone Gaskets from EMKA for Cabinets and Enclosures
The new silicone sealing gaskets for cabinets and enclosures from EMKA offer fire protection to DIN EN 45545-2 and other national/international standards and are suitable for road and rail hazard level applications and for high temperature environments for the protection against ingress of dust and water. - November 13, 2015 - EMKA (UK) Ltd.
Laboratory Testing Inc. Exhibiting at the 2015 Eastern PA Materials Expo
Laboratory Testing Inc. will join other members and guests of the Lehigh Valley Chapter of ASM International at the 2015 Eastern PA Materials Exposition. The event will be held on Thursday, November 12th, 2015 at the Holiday Inn and Conference Center in Breinigsville, PA. - November 06, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Article in Forge Magazine
Laboratory Testing Inc.’s outside sales representative, Eric Aparnieks, published an article in the October 2015 issue of Forge. The article entitled “Commercial Testing of Forgings” discusses the principal mechanical properties of interest in the forging industry and the most commonly utilized test methods. - November 05, 2015 - Laboratory Testing Inc.
Giussani Tumbler Lock Pop-Out T Handle Now Available from FDB Panel Fittings
The new P5P and sister P5GP Giussani Pop-out T handles from FDB Panel Fittings offer enhanced security and safety over the traditional T configuration, while retaining the same convenience and integral key tumbler lock system. The recessed handle minimises vandalism opportunities and its low... - November 05, 2015 - FDB Panel Fittings
EMKA Clip-in Pull Handles – for a Quick Sliding Action
New easy fit clip-in recessed pull handles from EMKA for sliding equipment panels or doors, or for light duty lifting, e.g. of storage boxes or portable instruments. - October 25, 2015 - EMKA (UK) Ltd.
New - Vibration Resistant Tensile Compensated Hook Clamp from Elesa UK
This new TLR hook clamp from Elesa is suitable for panels on specialist vehicles such as emergency service or off-road vehicles. They are also useful on packaged equipment which is subject to movement, re-siting and vibration during operation. - October 21, 2015 - ELESA (UK) Ltd
Long and Variable Length Handles and Hand Rails from EMKA
The new 1095 grab rail handle system from EMKA provides very long grab handles, or static hand rails of adjustable lengths, with extra supports for additional strength. They are suitable as grab rails or for guards, covers, inspection panels, e.g. feed guards or heavy machine covers. - October 17, 2015 - EMKA (UK) Ltd.
Laboratory Testing Inc. Exhibiting in Booth #N19071 at the FabTech Expo
Laboratory Testing Inc. will be exhibiting their accredited materials and nondestructive testing, dimensional inspection and calibration services at the FabTech expo in Booth #N19071. The event is being held in Chicago, IL on November 9th – 12th. - October 14, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Participated in the Feed My Starving Children Corporate Challenge
Laboratory Testing Inc. employees participated in the Feed My Starving Children MobilePack event on Saturday, September 26th at Delaware Valley University. Volunteers packed 357,696 meals, $62,000 in corporate and individual donations was raised and food was collected for local food pantries. - October 07, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Exhibiting at National Industrial Fastener and Mill Supply Expo
Laboratory Testing Inc. will be exhibiting at the 2015 National Industrial Fastener and Mill Supply Expo in Booth #816. The show will take place October 21-23, 2015 at the Sands Expo in Las Vegas, NV. LTI will be showcasing its fastener testing capabilities, as well as materials testing, non-destructive testing and dimensional inspection services. - October 02, 2015 - Laboratory Testing Inc.
FDB Hinges and Compression Locks Solve Storage Access Problems on Nippi Wheelchair Trike
Hinges and locks from FDB Panel Fittings improve the convenience and sealing of the storage compartments on either side of the wheelchair accessible Nippi Trike. - October 01, 2015 - FDB Panel Fittings
Elesa Stop Lock Retains Position Under Vibration Conditions
The new heavy duty Elesa Stop Lock keeps doors and drawers closed under strong vibration conditions. - September 26, 2015 - ELESA (UK) Ltd
EMKA Increase Safety and Sealing with 1130 Program Flush Compression Handles
The EMKA range of flush compression latches and handles increase safety by not having external projections to catch on clothing and are suitable for use on specialist enclosures, doors, access panels and storage lockers or vibration prone vehicles. - September 25, 2015 - EMKA (UK) Ltd.
Laboratory Testing NDT Article in Materials Evaluation Magazine
An article by Phillip W. Trach, non-destructive testing (NDT) employee and ultrasonic testing specialist at Laboratory Testing Inc., was published in the September 2015 issue of Materials Evaluation. The article, entitled “Introducing Young People to NDT,” is featured in a special... - September 24, 2015 - Laboratory Testing Inc.
New "Crown" Key IP65 Lock from FDB Panel Fittings for Telecoms Applications
The new Giussani NIA102 quarter-turn IP65 lock from FDB Panel Fittings is intended for switchboard and other telecoms applications such as racks, including outdoor applications where its IP65 protection is appropriate. - September 18, 2015 - FDB Panel Fittings
Laboratory Testing Inc. Exhibiting at Titanium USA 2015
Laboratory Testing Inc. will display materials testing and nondestructive testing services in Booth 712 during the Titanium USA 2015 Exposition. The show will take place at the Rosen Shingle Creek Golf Resort in Orlando, FL on October 4-7, 2015. LTI is experienced with all types of titanium and titanium alloys and performs testing to industry standards. - September 17, 2015 - Laboratory Testing Inc.
New Torque Amplifier Collar from Elesa UK Doubles Clamping Force
The new torque amplifier collar from Elesa, when used in conjunction with clamping handles and knobs, enables clamping forces to be doubled compared with non-amplified manual operation. - September 12, 2015 - ELESA (UK) Ltd
How to Protect Micro Data Centres and Individual Defined High Risk Cabinets in Data Centres or Co-Location Situations
This new white paper from EMKA addresses the issues involved in the physical protection of valuable or sensitive data in small data centres, right down to a single server cabinet. - September 11, 2015 - EMKA (UK) Ltd.
Laboratory Testing Inc. Announces Continuation of A2LA Accreditation and Expanded Scope
A2LA has successfully audited Laboratory Testing Inc. of Hatfield, PA for continuation of the Lab’s A2LA accreditation in mechanical, chemical and calibration services, and has approved additional capabilities. Additions to the scopes of the accreditations include axial fatigue testing, fatigue crack growth, creep rupture, double shear testing and bore micrometer calibration. - August 30, 2015 - Laboratory Testing Inc.
1110 Quick-Fit 120° Hinge from FDB Panel Fittings for Lay-on Cabinet Doors
The robust zinc die 120° hinge from FDB Panel Fittings enables panel builders to quickly install a removable 25mm return door with electrical safety compliance using just 2 off vibration proof screws and a retained hinge pin system. - August 29, 2015 - FDB Panel Fittings
EMKA 1011 Self-Gripping Gasket Profile Strips Seal Against Ingress of Dust and Water
The EMKA 1011 program of self-grip profiles seal doors and panels against the ingress of dust and water in many industrial situations from the factory floor to vehicles and outdoor or wash-down environments. They are easy to use, being simply pushed onto the door or frame edge up to 5mm thickness. - August 27, 2015 - EMKA (UK) Ltd.
Elesa’s New VTT Three-Lobe Handwheel for Frequently Cleaned Environments
The VTT three-lobe handwheel from Elesa is a highly functional and attractive component for equipment in industries such as bottling plants, canning lines, filling and packaging, dispensing and tableting machines. - August 20, 2015 - ELESA (UK) Ltd
RMI Develops New Laser Beam Expanders
Precision optics manufacturer, Rocky Mountain Instrument Co., has added laser beam expanders to their optical assembly product line. - August 19, 2015 - Rocky Mountain Instrument Co. (RMI)
Small Format Swinghandle from FDB Panel Fittings for Enclosures and Smaller Cabinets
The new small form factor 1150 program swinghandle from FDB Panel Fittings is suited to enclosures and smaller cabinets where door space is limited but IP65 sealing is required. - August 15, 2015 - FDB Panel Fittings
New EMKA 120° Hinge for Larger Door Returns – Also in Stainless Steel
The new 1032 program 120° hinge from EMKA provides a weld-on solution for larger prominent cabinet doors as often used by specialist panel builders for heavy duty panels. - August 13, 2015 - EMKA (UK) Ltd.
Distributor Mutual Screw & Supply Adds Precision Tools, Gages & Instruments to Its Offering
National Fastener Distributor, Mutual Screw & Supply adds Starrett Precision Tools, Gages & instruments to its on line offering. The broad Starrett product line includes precision measuring tools (micrometers, calipers, rules, etc.), levels, electronic gages, dial indicators, and custom... - August 12, 2015 - Mutual Screw & Supply Inc
New Catalogue from Elesa UK - Accessories for Hydraulic Systems
New Accessories for Hydraulic Systems catalogue from Elesa includes oil plugs, breather caps, oil level indicators, column level indicators and float level indicators. - August 06, 2015 - ELESA (UK) Ltd
DeckLok Verified to Meet (ICC-ES) Codes
DeckLok, the patented lateral anchor system from Screw Products, Inc., recently received an updated ESR-2114 evaluation from ICC Evaluation Service (ICC-ES) verifying the bracket’s continued compliance with code requirements. This was based on a thorough examination of Screw Products, Inc. - August 04, 2015 - Screw Products
New 120 Degree Hinge from EMKA UK for Specialist Cabinets with Prominent/Lay-on Doors
EMKA have produced their new 1069 series cabinet hinge for prominent/lay-on doors in both zinc plated steel and stainless steel AISI 304. - July 30, 2015 - EMKA (UK) Ltd.
New Screw-On, Lift-Off Hinges from EMKA UK for Recessed/Flush Doors
Screw-on, lift-off hinges in black finish zinc die or in AISI 316 stainless steel from EMKA UK for the robust operation of recessed/flush doors and their removal for access purposes. - July 28, 2015 - EMKA (UK) Ltd.