Recent Headlines
Laboratory Testing Inc. Highlighting Materials Testing and Calibration Services at Fabtech Show
Laboratory Testing Inc. will be exhibiting in Booth #903 at Fabtech International in November 2010. The testing and metrology laboratory’s materials testing, nondestructive testing, dimensional inspection, welder and procedure qualification, and calibration services will be featured. - October 10, 2010 - Laboratory Testing Inc.
Laboratory Testing Inc. Sponsors Team for 2010 MS City to Shore Bike Ride
Laboratory Testing Inc. sponsored a team of fifteen riders for the 2010 MS City to Shore Bike Ride held on September 25th and 26th by matching all individual sponsorship donations raised by Team Laboratory Testing. The Team made a total contribution of $5,760 to the National MS Society. - October 09, 2010 - Laboratory Testing Inc.
SEM / EDS Analysis Added to Materials Testing & Failure Analysis Capabilities at Laboratory Testing Inc.
Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectrometry (EDS / EDX) have been added to the materials testing and failure analysis capabilities performed at Laboratory Testing Inc. of Hatfield, PA. The new system allows for high magnification evaluation, element analysis and material characterization. - August 12, 2010 - Laboratory Testing Inc.
Laboratory Testing Inc. Sponsors ASM Materials Camp
Independent materials testing and calibration laboratory, Laboratory Testing Inc., sponsored the Philadelphia area ASM Materials Camp held at Drexel University in June 2010. The week long Camp was attended by twenty eight area high school students interested in pursuing materials engineering and laboratory careers. - July 24, 2010 - Laboratory Testing Inc.
Hardness Testing Capabilities Expanded at Laboratory Testing Inc.
A new Struers state-of-the-art hardness testing system has expanded Vickers and Knoop test load ranges and the capacity for mounted samples in the Metallography Lab at Laboratory Testing Inc. - June 06, 2010 - Laboratory Testing Inc.
Laboratory Testing Inc. Expands & Renews PRI Nadcap Accreditation
Nadcap accreditations for materials testing and ISO/IEC 17025 have been expanded and renewed for Laboratory Testing Inc. through October 31, 2011. ICP Mass Spectroscopy and Metallographic Evaluation of Fusion Welds and Welder / Welding Operator Qualifications were added to the scope of accreditation at renewal. - April 03, 2010 - Laboratory Testing Inc.
Laboratory Testing Inc. Expands A2LA Accreditation for Calibration Services
Laboratory Testing Inc. has expanded its A2LA accreditation to include calibration of Length Standards to 60 inches, Tapered Thread Rings, Tapered Thread Plugs, and Rules to 78 inches. The scope of accreditation already included the calibration of standards, gages, measuring tools, torque wrenches, force measurement, and field calibration services. - March 12, 2010 - Laboratory Testing Inc.
Laboratory Testing Inc. Promotes Two to Supervisor
Laboratory Testing Inc. promotes two to Accounting and Shipping/Receiving Supervisors at the materials testing, nondestructive testing, calibration and specimen machining company. - February 04, 2010 - Laboratory Testing Inc.
Customer Service Supervisor Joins Laboratory Testing Inc.
Laboratory Testing Inc. has added a Customer Service Supervisor to the sales team overseeing all materials testing, nondestructive testing, calibration and machining services. - February 03, 2010 - Laboratory Testing Inc.
Ruggedized RFID Tag Breaks Dollar Pricing Barrier
International Coding Technologies, Inc. announced today the release of a rugged RFID identification tag for concrete, steel, pallets and other assets for under $1.00. A single tag with human readable format, a bar code and RFID all on one RFID inlay. - January 21, 2010 - International Coding Technologies, Inc.
Rugged RFID Identification System Introduced for Steel Fabricators
International Coding Technologies, Inc. announced today the release of a rugged RFID identification system for steel fabricators. A single tag, Steel-Code®, combines human readable format, with a bar code and RFID all on one label. This label is sealed in a ruggedized, watertight, dust proof... - December 19, 2009 - International Coding Technologies, Inc.
Wright Building Gets Business Award
Wright Building Systems, Inc has been selected for the 2009 Best of Hendersonville Award in the Prefabricated Structures category by the U.S. Commerce Association (USCA). - November 01, 2009 - WRIGHT BUILDING SYSTEMS INC
Laboratory Testing Inc. Unveils Six Videos in a Web Microsite
Laboratory Testing Inc. has introduced six HD videos on materials and nondestructive testing, calibration services and failure analysis on their website and YouTube. - October 31, 2009 - Laboratory Testing Inc.
Laboratory Testing’s UT Supervisor Approved as NDT MIL-STD-2132 Examiner
NDT MIL-STD-2132 Examiner approval has been granted to the Ultrasonic Testing Supervisor at Laboratory Testing Inc. for both immersion and contact ultrasonic testing methods. - October 21, 2009 - Laboratory Testing Inc.
Laboratory Testing Inc. Selected for 2009 Best Places to Work in PA
Laboratory Testing Inc., an accredited, independent materials testing, nondestructive testing and calibration laboratory with over 100 employees, has been named one of the Best Places to Work in PA for 2009. - September 24, 2009 - Laboratory Testing Inc.
Arrow Tool Repair, Inc. Receives 2009 Best of Westland Award. U.S. Commerce Association’s Award Plaque Honors the Achievement
Arrow Tool Repair Inc has been selected for the 2009 Best of Westland Award in the Industrial Equipment Services category by the U.S. Commerce Association (USCA). - August 05, 2009 - Arrow Tool Repair, Inc.
Laboratory Testing Inc. Renews A2LA Accreditation for Calibration & Dimensional Testing
The American Association for Laboratory Accreditation (A2LA) has renewed accreditation for calibration services and dimensional testing at Laboratory Testing Inc. The accreditation is valid through March 31, 2011. - July 03, 2009 - Laboratory Testing Inc.
Laboratory Testing Inc. Renews PRI/Nadcap Accreditation for Nondestructive Testing
Laboratory Testing Inc. has been re-accredited by PRI/Nadcap through March 31, 2011 for nondestructive testing services, including liquid penetrant testing, magnetic particle testing, and ultrasonic inspection services. - July 01, 2009 - Laboratory Testing Inc.
New Spectrometers Enhance Elemental Analysis Capacities at Laboratory Testing Inc.
Two new ICP Spectrometers were purchased by the Chemical Analysis Lab at Laboratory Testing Inc. to increase chemical testing capacity, improve trace elemental analysis and provide analysis of samples into the parts per million range. - June 18, 2009 - Laboratory Testing Inc.
Chemistry Supervisor Named at Laboratory Testing Inc.
Shirley Aravich has been named Chemistry Supervisor for the second shift at Laboratory Testing Inc. to oversee chemical analysis and wet chemistry testing. - January 23, 2009 - Laboratory Testing Inc.
Mechanical Testing Supervisor Appointed at Laboratory Testing Inc.
Frank Adornetto, an 18-year employee of Laboratory Testing Inc., has been promoted to Mechanical Testing Supervisor. He will oversee all mechanical testing services performed by the testing laboratory. - January 21, 2009 - Laboratory Testing Inc.
Nondestructive Testing Promotions at Laboratory Testing Inc.
Recent growth in testing orders and in the number of employees processing the workload at Laboratory Testing Inc. prompted the promotion of long-term nondestructive testing employees to supervisory positions to oversee staff scheduling, order processing, quality control and supply management. - January 17, 2009 - Laboratory Testing Inc.
Nondestructive Testing Manager Selected at Laboratory Testing Inc.
Laboratory Testing Inc. has appointed Rich Goodwin as Nondestructive Testing Manager to oversee staffing and all operations in the ultrasonic testing, magnetic particle, liquid penetrant, hydrostatic pressure and X-ray areas of the NDT Department. - January 16, 2009 - Laboratory Testing Inc.
Technical Sales Manager Appointed at Laboratory Testing Inc.
Laboratory Testing Inc. created a Technical Sales Manager position to enhance customer service, improve communication and provide technical education on materials testing, nondestructive testing and calibration services. - January 14, 2009 - Laboratory Testing Inc.
Laboratory Testing Inc. Expands Immersion Ultrasonic Testing for Materials Up to 5000 Lbs
Laboratory Testing expanded its ultrasonic testing capabilities with a computerized immersion scan tank for large materials up to 20 feet long, 4 feet wide and 5000 pounds. The equipment improves turnaround for large volume, repetitive orders and accuracy over the contact method. - December 24, 2008 - Laboratory Testing Inc.
Arrow Tool Repair, Inc. Received 2008 Best of Westland Award
Arrow Tool Repair, Inc. has been selected for the 2008 Best of Westland Award in the Strapping & Strapping Equipment category by the U.S. Local Business Association (USLBA). - December 11, 2008 - Arrow Tool Repair, Inc.
Laboratory Testing Inc. Implements Improved Surface Plate Calibration Services
Laboratory Testing Inc. of PA has implemented a computerized surface plate calibration system with leveling feet to ensure reliable surface evaluation and provide customers with detailed diagrams and measurements explaining surface plate wear and deviation from the standard. - November 03, 2008 - Laboratory Testing Inc.
Laboratory Testing Inc. Exhibiting at Power-Gen Show
Laboratory Testing Inc. will be exhibiting at Power-Gen International in Orlando, FL from December 2-4, 2008. Laboratory Testing is one of the leading materials testing laboratories serving the power generation industry. - November 03, 2008 - Laboratory Testing Inc.
Don Meyers of Laboratory Testing Inc. Named ASNT Technician of the Month
The Greater Philadelphia Chapter of ASNT recognized Don Meyers, a 14-year employee and Liquid Penetrant Inspection Lead at Laboratory Testing Inc. The August 2008 "Technician of the Month" award was presented to Meyers for outstanding quality and experience in the field of nondestructive testing. - November 02, 2008 - Laboratory Testing Inc.
Metallurgical Lab Supervisor Joins Laboratory Testing Inc.
Laboratory Testing Inc. hires Brad Bergman, an experienced metallurgical and materials engineer, as Metallurgical Lab Supervisor to oversee all orders for metallurgical examination and failure analysis. - November 02, 2008 - Laboratory Testing Inc.
Allegheny Technologies Unveils New Specialty Armor Steel for U.S. and International Defense Markets
The first new, high-hard steel armor developed in America since the Vietnam conflict was introduced to the defense market today by Allegheny Technologies Incorporated (NYSE:ATI). It offers a modern means of protection – backed by unsurpassed manufacturing capabilities – at a time of... - June 19, 2008 - Allegheny Technologies, Inc.
ASWA Board Names Susan R. Tripepi, Director
Susan R Tripepi, has been named Director of the 2008-09 board of the American Society of Women Accountants. She is a member of the Akron/Canton Chapter in Ohio. “ASWA is such a unique organization serving women both professionally and personally. I feel very privileged to have the... - June 15, 2008 - Republic Engineered Products
Laboratory Testing Inc. Completes 12,000 Sq. Ft. Expansion
Laboratory Testing Inc. recently completed construction of a 12,000 sq. ft. building addition and 65-space parking lot to support steady sales growth and plans to add new materials testing and calibration services at the testing laboratory. - March 06, 2008 - Laboratory Testing Inc.
Laboratory Testing Inc. Featuring Materials Testing and Calibration Services at NACE Expo
Laboratory Testing Inc. will feature materials testing, nondestructive testing and calibration services at the NACE Corrosion 2008 Conference & Expo Booth 1210 from March 17 – 20, 2008. - March 06, 2008 - Laboratory Testing Inc.
Laboratory Testing Renews PRI/Nadcap Accreditation for Nondestructive Testing
Laboratory Testing Inc. (LTI) has been re-accredited for Nondestructive Testing by PRI/Nadcap (Performance Review Institute’s industry-managed program for special processes in the aerospace industry). The scope of the approval includes liquid penetrant, magnetic particle, and ultrasonic... - December 22, 2007 - Laboratory Testing Inc.
LTI Aquires Mahr Linear 2000 for Additional Calibration Capacity and Accuracy
LTI Metrology, the calibration lab at Laboratory Testing Inc., recently added a Mahr (Helios) Linear 2000 for dimensional calibration of measuring instruments with lengths up to 2 meters or 78 inches. - December 22, 2007 - Laboratory Testing Inc.