Recent Headlines
Laboratory Testing Inc. Scheduled to Exhibit at Power-Gen International 2015
Laboratory Testing Inc. will display materials testing, nondestructive testing and failure analysis services in Booth #4645 during the Power-Gen International Expo in Las Vegas, NV on December 8-10, 2015. LTI’s wide-range of testing services are used to inspect construction materials for power sites and to analyze parts that fail. - November 19, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Exhibiting at the 2015 Eastern PA Materials Expo
Laboratory Testing Inc. will join other members and guests of the Lehigh Valley Chapter of ASM International at the 2015 Eastern PA Materials Exposition. The event will be held on Thursday, November 12th, 2015 at the Holiday Inn and Conference Center in Breinigsville, PA. - November 06, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Article in Forge Magazine
Laboratory Testing Inc.’s outside sales representative, Eric Aparnieks, published an article in the October 2015 issue of Forge. The article entitled “Commercial Testing of Forgings” discusses the principal mechanical properties of interest in the forging industry and the most commonly utilized test methods. - November 05, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Exhibiting in Booth #N19071 at the FabTech Expo
Laboratory Testing Inc. will be exhibiting their accredited materials and nondestructive testing, dimensional inspection and calibration services at the FabTech expo in Booth #N19071. The event is being held in Chicago, IL on November 9th – 12th. - October 14, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Participated in the Feed My Starving Children Corporate Challenge
Laboratory Testing Inc. employees participated in the Feed My Starving Children MobilePack event on Saturday, September 26th at Delaware Valley University. Volunteers packed 357,696 meals, $62,000 in corporate and individual donations was raised and food was collected for local food pantries. - October 07, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Exhibiting at National Industrial Fastener and Mill Supply Expo
Laboratory Testing Inc. will be exhibiting at the 2015 National Industrial Fastener and Mill Supply Expo in Booth #816. The show will take place October 21-23, 2015 at the Sands Expo in Las Vegas, NV. LTI will be showcasing its fastener testing capabilities, as well as materials testing, non-destructive testing and dimensional inspection services. - October 02, 2015 - Laboratory Testing Inc.
Laboratory Testing NDT Article in Materials Evaluation Magazine
An article by Phillip W. Trach, non-destructive testing (NDT) employee and ultrasonic testing specialist at Laboratory Testing Inc., was published in the September 2015 issue of Materials Evaluation. The article, entitled “Introducing Young People to NDT,” is featured in a special... - September 24, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Exhibiting at Titanium USA 2015
Laboratory Testing Inc. will display materials testing and nondestructive testing services in Booth 712 during the Titanium USA 2015 Exposition. The show will take place at the Rosen Shingle Creek Golf Resort in Orlando, FL on October 4-7, 2015. LTI is experienced with all types of titanium and titanium alloys and performs testing to industry standards. - September 17, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Announces Continuation of A2LA Accreditation and Expanded Scope
A2LA has successfully audited Laboratory Testing Inc. of Hatfield, PA for continuation of the Lab’s A2LA accreditation in mechanical, chemical and calibration services, and has approved additional capabilities. Additions to the scopes of the accreditations include axial fatigue testing, fatigue crack growth, creep rupture, double shear testing and bore micrometer calibration. - August 30, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Hires Experienced Outside Sales Representative
Veteran sales rep, Eric Aparnieks, joins Laboratory Testing Inc. with over 35 years of experience and a background in NDT testing, metallographic sample evaluation and R&D with various high temperature alloys and non-ferrous materials. - June 24, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Adds Customer Service Representative to a Growing Team
The materials testing, nondestructive testing and calibration support team has grown again at LTI. John Malack has joined the group as a Customer Service Representative with 20 years of experience in related businesses. - June 20, 2015 - Laboratory Testing Inc.
Windy City Sales, Ltd. Has Been Acquired by Duraflex, Inc.
Duraflex, Inc. announces the recent acquisition of Windy City Sales, Ltd., a leading domestic OEM supplier & distributor of Flexible Stainless Steel Braided Hose Connectors for HVAC & Plumbing applications. - June 17, 2015 - Duraflex, Inc.
X-ray Inspection Coordinator Earns AWS Certified Welding Inspector
A nondestructive testing employee at Laboratory Testing Inc. has earned the AWS Certified Welding Inspector certificate. Responsibilities as a CWI will include inspecting the quality of the metal joining work submitted by customers for Welder Qualification and Welding Procedure Qualification. - June 17, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Hires Seasoned Manager for Calibration and Dimensional Inspection
Ken Horvath brings years of calibration experience to Laboratory Testing Inc. as Metrology Manager. He will oversee dimensional inspection and calibration services and help develop customer relationships, sales, department plans and forecasts. - June 05, 2015 - Laboratory Testing Inc.
Waterjet Boosts Fast, Precision Test Specimen Machining at Laboratory Testing Inc.
For the most reliable test specimens and faster specimen machining, Laboratory Testing Inc. purchased a Maxiem waterjet system. Customers will get quick turnaround on precision specimens from metals, plastics and other materials. - May 24, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Expands and Renews Nadcap Accreditation for Materials Testing
The Nadcap accreditation in materials testing covering mechanical testing and sample preparation, metallurgical evaluation and chemical analysis has been renewed for Laboratory Testing Inc. with 18-month merit status. The scope was also broadened with additional services, including compression testing, high cycle fatigue, creep testing, crack propagation/crack growth testing, evaluation of welds for GE Aviation and Pratt & Whitney and more. - May 03, 2015 - Laboratory Testing Inc.
Congressman Mike Fitzpatrick Visits Laboratory Testing Inc.
Congressman Mike Fitzpatrick visited Laboratory Testing Inc. to see firsthand how the company supports the production of aircraft carriers with materials testing services. He took the opportunity to tour the facilities and meet with the company owners and employees. - April 26, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Scheduled to Exhibit at Mid-Atlantic Design-2-Part
Laboratory Testing Inc. will be showcasing its materials testing and calibration capabilities at the Design-2-Part Show in booth #235. D2P will be held at the Greater Philadelphia Expo Center in Phoenixville, PA from April 22-23, 2015. - April 11, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Scheduled to Exhibit at NACE Corrosion 2015
Laboratory Testing Inc. will be exhibiting its corrosion testing and analysis, materials testing and calibration capabilities at NACE Corrosion in booth #13044. NACE Corrosion will be held at the Kay Bailey Hutchison Convention Center in Dallas, TX from March 16-19, 2015. - February 01, 2015 - Laboratory Testing Inc.
Laboratory Testing Inc. Successfully Completes NUPIC Audit
Laboratory Testing Inc. has successfully completed an audit conducted by NUPIC members to verify effective implementation of the Lab’s QA program. As a result, LTI was re-approved for the NUPIC Approved Suppliers List to provide material testing, nondestructive testing and calibration services for another thirty months. - December 07, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Receives Gulfstream Aerospace Approval
Laboratory Testing Inc. has received an Approval of Supplier Certificate from Gulfstream Aerospace for materials testing services. LTI can now perform an extensive list of chemical analysis, metallurgical testing, mechanical testing and nondestructive testing services for Gulfstream and its suppliers. The approval was issued on November 20, 2014 and will be valid for the next three years. - November 28, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. is a Scheduled Power-Gen International Exhibitor
LTI, an accredited materials testing and calibration lab, will be showcasing its services at Power-Gen International in Booth # 3854. The Expo will be held at the Orange County Convention Center in Orlando, FL from December 9-11, 2014. - November 16, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Welcomes New Outside Sales Representative
Laboratory Testing Inc. introduces Eric Baum as new Outside Sales Representative. Eric will be responsible for creating new materials testing and calibration business opportunities and growing LTI’s customer base, while strengthening relationships with current customers. - November 07, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. to Spotlight Material Testing and Calibration at Fabtech 2014
Laboratory Testing Inc. will be exhibiting its material testing, nondestructive testing and calibration capabilities at the Fabtech Expo in Booth C1107. The show will take place at the Georgia World Congress Center in Atlanta, GA on November 11-13, 2014. - November 05, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Participated in “Feed My Starving Children” Event
Laboratory Testing Inc. employees attended the Feed My Starving Children (FMSC) MoblePack event at Delaware Valley College in Doylestown, PA. The work of all volunteers produced 272,160 packaged meals for needy West African children. Laboratory Testing Inc. also donated 1,200 lbs. of food to the Bucks County Housing Group. - November 02, 2014 - Laboratory Testing Inc.
New Inside Sales Employee Joins Laboratory Testing Inc.
Laboratory Testing Inc. announces Chris Mecleary as a new Inside Sales Rep. Mecleary will provide materials testing, nondestructive testing and calibration customers with service and support related to product information, pricing and orders. - October 31, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Hires Experienced Inside Sales Employee
Laboratory Testing Inc. welcomes Glen Hicks as a new Inside Sales employee. In his role, Glen will supply nondestructive testing, materials testing and calibration customers with fast, friendly service while handling inquiries, providing quotations and expediting orders. - October 22, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Magnetic Particle Inspection Article Featured in Quality Magazine
Laboratory Testing Inc. article, entitled “Choose the Most Reliable MPI Method for Your Business,” was published in the October 2014 issue of Quality Magazine. The author, Nondestructive Testing Manager Rich Goodwin, highlights testing results from three Magnetic Particle Inspection techniques and details their effectiveness. - October 19, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Featuring Fastener Testing at National Industrial Fastener Expo
Laboratory Testing Inc. will be exhibiting its fastener testing capabilities, as well as materials testing, nondestructive testing and calibration services, at the 2014 National Industrial Fastener Expo in Booth #623. The show will take place at the Sands Expo & Convention Center in Las Vegas, NV on October 23-24, 2014. - October 17, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Chosen to Host NCSL International Meeting
LTI is hosting the 2014 NCSLI Philadelphia Section on October 23rd. The meeting will feature three presentations on metrology and calibration topics by Greg Strouse, Scott Mimbs and Joshua Biggar, and conclude with a tour of LTI’s facilities. - October 13, 2014 - Laboratory Testing Inc.
Laboratory Testing NDT Technical Coordinator to Present at 2014 ASNT Annual Conference
LTI employee Phil Trach will present “Introducing Young People to NDT” at the 2014 ASNT Annual Conference. The presentation instructs professionals on a proven process for passing on nondestructive testing knowledge and for generating interest in the field with the next generation of potential NDT practitioners. The conference will be held in Charleston, SC on October 27-30, 2014. - October 05, 2014 - Laboratory Testing Inc.
Legendary Coach R. C. Slocum to Keynote PESA Leadership Luncheon in Houston
Hannon Hydraulics and the Petroleum Equipment & Services Association (PESA) welcomes legendary Texas A&M football coach R. C. Slocum as keynote speaker at the group’s October 15th Executive Leadership Seminar in Houston, Texas. - October 01, 2014 - Hannon Hydraulics
Laboratory Testing Inc. Offers Contamination Control Certification Services
LTI now offers Contamination Control Certification Services, performing required testing including velocity profile, HEPA leak test, airflow patterns, particle count, decontamination and much more. Certification services are offered for hoods, filtered units and biosafety cabinets to verify containment and maintain cleanliness. - September 26, 2014 - Laboratory Testing Inc.
Moisture Analysis for Welding Flux & Inorganic Samples Offered by Laboratory Testing Inc.
Moisture Analysis for welding flux and inorganic samples is now performed by Laboratory Testing Inc. The analysis is A2LA accredited to ISO 17025 and test procedures conform to standards AWS A4.4 M, MIL-E-23765/2E and EB 4906 Rev A. - August 22, 2014 - Laboratory Testing Inc.
Material Testing and Metrology Lab Celebrates 30th Anniversary
Laboratory Testing Inc. of Hatfield, PA, marks its 30th anniversary this year. Since 1984, many expansions and changes at LTI grew the company to a 91,500 sq. ft. facility with 145 employees performing a wide-range of services. - July 20, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Obtains Updated GE Transportation Aviation Approval
LTI’s S-400 approval from GE Transportation Aviation has been updated to also include High Cycle Fatigue Testing and E50TF133 Grain Size Evaluation. The full list of GE approvals currently held by LTI covers services performed in the Chemistry, Metallography, Mechanical Testing and Nondestructive Testing Labs. - June 13, 2014 - Laboratory Testing Inc.
Metallurgical Engineer Joins Laboratory Testing Inc.
Laboratory Testing Inc. welcomes Greg Fackler as Metallurgical Engineer. His primary responsibilities include conducting microstructure examinations, macrostructure examinations, microhardness testing and failure analysis. - June 01, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. to Exhibit at MD&M East 2014
LTI will feature materials testing, nondestructive testing, calibration services and more during the MD&M East Show in New York on June 10-12. LTI will be exhibiting in Booth #1767, where they will feature information about their company and services. - May 21, 2014 - Laboratory Testing Inc.
New Elevated Temperature Tensile Testing Video from Laboratory Testing Inc.
LTI has posted a new video on YouTube demonstrating an Elevated Temperature Tensile Test. Elevated Temperature Tensile Testing is performed to evaluate the strength of materials under high heat and stress situations. - May 03, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Announces A2LA Accreditation Additions for Calibration Services
A2LA has approved LTI for additional calibration capabilities under its accreditation. Additions to the scope of the accreditation include new hardness tester calibration capabilities and an expanded range of balances & scales. - May 03, 2014 - Laboratory Testing Inc.
Mechanical Testing Promotions at Laboratory Testing Inc.
Laboratory Testing Inc announces new roles for two of its employees, Steve Bowers as Mechanical Testing Workflow Supervisor and Paul Szczepaniak as second-shift Coordinator for Mechanical Testing. Bowers and Szczepaniak will have responsibilities relating to the full-range of mechanical testing services performed at Laboratory Testing Inc. including tensile testing, charpy impact testing, hardness testing, fracture toughness and fatigue testing and stress rupture testing. - April 19, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Materials Testing & Calibration Services to be Featured at Design-2-Part
LTI will feature materials testing, nondestructive testing, calibration services and more during the Design-2-Part Show in Secaucus on April 9 and 10. Visit LTI in Booth #344 for more information on services, pricing and accreditations. - April 10, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. to Meet with Members of Congress During ACIBC Action Days
Laboratory Testing Inc. will be meeting with members of Congress during ACIBC Action Days 2014. LTI representatives will debate the cutting of funds for the U.S Navy’s aircraft carrier construction and maintenance program. - March 22, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Exhibiting at NACE Expo 2014
Laboratory Testing Inc. will be exhibiting in Booth #1528 at the NACE Corrosion Expo. The testing laboratory performs corrosion testing services and a range of additional capabilities and solutions for material testing, evaluation and failure analysis. - February 27, 2014 - Laboratory Testing Inc.
Laboratory Testing Inc. Introduces New Business Development Sales Manager
A New Business Development Sales Manager has joined LTI Inc. to expand the customer base purchasing the materials testing, nondestructive testing and calibration services performed by the testing lab. - February 20, 2014 - Laboratory Testing Inc.
New Inside Sales Employee at Laboratory Testing Inc.
Joseph Farrell has joined Laboratory Testing Inc. as an Inside Sales employee in the Customer Service/Sales Department. Joe will be providing customers with all aspects of support. The Customer Service/Sales Department assists customers with information and orders for all of the services offered by the laboratory. - February 13, 2014 - Laboratory Testing Inc.
Eco Pickled Surface (EPS) Technology Wins Approval from General Motors and Chrysler
The following is to the worldwide steel, metals and metalworking industry press and presents the latest news on Eco Pickled Surface (EPS) steel pickling technology. - December 31, 2013 - The Material Works, Ltd.
First Generation 2.0 Multi-Cell EPS Production Line in Operation in China
Eco Pickled Surface, the groundbreaking technology that replaces acid pickling of strip steel, is now operating in the world's largest steel market. - December 02, 2013 - The Material Works, Ltd.
Laboratory Testing Inc. Featuring Materials Testing and Calibration Services at Fabtech
Laboratory Testing Inc. (LTI) will be exhibiting in Booth #S3515 at the Fabtech International and AWS Welding Show in Chicago, Illinois from November 18 - 21, 2013. Laboratory Testing Inc. is a leading material testing, nondestructive testing, dimensional metrology and calibration services laboratory serving manufacturers and other businesses working with metal forming, fabricating, finishing and welding suppliers. - November 21, 2013 - Laboratory Testing Inc.
Laboratory Testing Inc. Successfully Completes NIAC Member Audit for Reapproval
LTI successfully completed a NIAC member audit and was reapproved for materials testing, nondestructive testing, dimensional inspection, calibration and machining. - November 21, 2013 - Laboratory Testing Inc.